Search results

be careful with it though, it's not street legal without a number plate, VED, insurance and you wearing a helmet. The law allows only 250W e-bikes with 15mph assisted speed. A heavy 1500W bike is not one that you can legally ride on cycle tracks.

check first that the brake pads don't touch the rotor. Use a torch to look into the space between the brake pads, If one of the pads touches the rotor, you need to loosen the two M5 bolts holding the caliper and adjust the caliper so that the rotor runs true in the middle between the two pads.

the motor should freewheel in the forward direction, engages the gearbox and resists a bit in when you reverse. If it does not freewheel in the forward direction, please post some close up pictures of the washers and wheelnuts.

in the last picture, the plug needs to be pushed in another 1.5mm

the lack of speed readout is a concern. The speed sensor is inside the motor. Unplug the throttle and brake sensors to narrow the possibilities. If the problem does not go away, unplug the motor connector, check the 9 pins for any sign of damage and reconnect. If the problem does not go away...

A possible cause is the side of your throttle touches something on the handebars. Unplug the throttle to see if the problem goes away. If it does, then move the throttle a bit, leaving about 1mm gap between the throttle and other things.

How to check the kit: check the motor connector. There is a ring imprinted on the motor's side of the 9-pin connector. You want to line up the parts of the connector so that two arrow heads face one another then push the two parts together until the ring reaches the controller's side. Post a...

he is but also, he is Johnson's chief of staff, a post as important if not more so in the Cabinet.

I can concur with Bob @ Juicy. Demand is unusually high. I have never seen anything like this in the last 10 years. We have shipment arriving every week from late July but you should think about reserving your bikes, by the time new stock arrives, there won't be much left. Rambla, Santana3...

I have a Bosch 36V tool battery on my desk. I am toying with the idea of using it as my range extender...

don't do that. Each set is optimised to work together. A 36V motor that is optimised for 15mph when run with a 48V controller is no longer optimised for 15mph but 30% higher, therefore will run at a lousy yield when climbing hills, it will shed a lot more heat and melt your plastic gears. All...

torque goes up when the RPM goes down, when the motor stalls, torque is highest but of course, a stalling motor is not useful. The way that crank motors' torque is measured is also different from hub motors' torque. One RPM at the cranks can correspond between 1.5-4.5 wheels' RPM depending on...

that's the job for the media adviser. Cummings deals with government policies. That's what earned him £800 millions in this year's budget for his pet project 'blue skies' or whatever happens next after brexit.

there was some newspaper article about the time that Cummings advertised for weirdos to come and work with him at his new £800,000,000 'blue skies research agency'. Government money of course. He'll get out rich and a good civil service pension whatever the outcome.

we can fit another 8-speed shifter if required.

yours is same bottom bracket as on my Brompton. It has plastic cups. https://www.tweekscycles.com/park-tool-bbt32c-bottom-bracket-tool-20-tooth-splines-madqkbbt32c/ https://www.ebay.co.uk/itm/Crank-Extractor-Puller-Bottom-Bracket-Remover-Repair-Tools-for-Bike-Bicycle-RD/133423780419

https://brilliantbikes.co.uk/bottom-bracket-tools/122-park-tool-bbt-4.html On my Brompton, it's an ordinary bottom bracket, so I use ordinary tool for square taper bottom brackets. how old is your Brompton? Post a picture of your bottom bracket to be sure.

The pedal sensor has to be on the chainring side so that you don't accidentally kick it and the cable is not exposed. the kit comes with the tried and tested steel mount, it's bullet proof. You have to remove the bottom bracket and refit. Steel mount: If you don't want to do that, you can...

Details are now on our website: https://wooshbikes.co.uk/?hubkits#q70kit To buy one: https://wooshbikes.co.uk/cart/#/product/uid-244-q70sf-13ah/q70-front-hub-kit-for-brompton-with-13ah-battery

Santana3 none left. next shipment arrives 31-July.