Search results

  1. anotherkiwi

    can i use my suntour ncx 27mm dia on another bike with 32mm sized hole

    https://www.bike-discount.de/en/buy/radon-seatpost-adapter-27%2C2mm-to-31%2C4mm-500894 etc...
  2. anotherkiwi

    Charging problems

    Bingo! Not good... Best to bin the battery and start over as suggested above.
  3. anotherkiwi

    Charging problems

    Look particularly at cell string n°7, are they puffed up? Leaking?
  4. anotherkiwi

    Charging problems

    :eek: pouch cells!
  5. anotherkiwi

    Newbie - Advice required on conversion legals please?

    In the UK... don't try riding it on the continent.
  6. anotherkiwi

    Changing a cassette on an e-bike/ granny gear!

    You could go for a 44, I have a 42 as replacement for a 46 and it is just that little bit too much. Your cassette will be an Acera HG41 11-34 which is already a pretty low gear. This might help: http://www.bikecalc.com/gear_inches
  7. anotherkiwi

    Shimano Nexus7 vs 8 speed

    The 8 has better gear spacing and there is a "premium" version which has needle bearings instead of ordinary old bushings. In fact the premium version is actually the Alfine 8 speed without the disk brake mounting...
  8. anotherkiwi

    Newbie - Advice required on conversion legals please?

    Just to add a little spice... The EU publishes regulations, sovereign national governments pass them into law (or not - as in NI). Throttles are a very UK thing, you won't find many on bikes in the EU even though they are easy enough to buy online from EU electric bike stores.
  9. anotherkiwi

    Changing a cassette on an e-bike/ granny gear!

    What is your lowest gear? Sunrace make a wide range 11-40 otherwise 11-34 is pretty common.
  10. anotherkiwi

    GSM / S12S / LCD3 / 36V - error code 03-INFO

    IIRC there are many more magnets in the GSM I think it may be the same PAS as the bafang BBS01.
  11. anotherkiwi

    GSM / S12S / LCD3 / 36V - error code 03-INFO

    Mine worked OK with the KT controller but it also worked when pedalling backward and it had a lot of run on when you stopped pedaling. I have forgotten the setting it worked best on because I fried it pretty quickly by plugging it into the speed sensor plug by mistake... :oops:
  12. anotherkiwi

    GSM / S12S / LCD3 / 36V - error code 03-INFO

    I thought I had posted them somewhere on my thread but no :( They are somewhere on the forum of that I am sure but where :confused: Lucky you! In an e-mail to Woosh: My settings for the LCD 3 with the S06SC Sine Wave Controller for Central Motor: P1 - 160 (motor gear reduction ratio × number...
  13. anotherkiwi

    Brexit, for once some facts.

    This technology has me worried a little about democracy... It is used for manipulating the vote of the less discerning members of the public (yes I am being PC) and has given us Brexit and Trump. Well at least they have invented something that works! :eek:
  14. anotherkiwi

    GSM / S12S / LCD3 / 36V - error code 03-INFO

    Sorry, I don't have that controller I have the S06S. I fried the PAS by plugging it into the wrong JST connector but it went POP! so I had no problem diagnosing... :oops:
  15. anotherkiwi

    Shaft drive Ebikes?

    You can equal it with a mid-drive with external controller and derailleur gears :D Mostly because it mounts in aluminium frames without torque arms and you get high torque when you need it and speed when you need that too!
  16. anotherkiwi

    Come on spring

    The chain suffers because the trike is folded after each and every ride... I can park it safely but the components suffer, always a compromise...
  17. anotherkiwi

    Graphene Tyres

    Or 19.90€ from a German discount web shop... Graphene in batteries, graphene in tyres, when do we find out that it is really toxic and dangerous and that we shouldn't be using it? :rolleyes:
  18. anotherkiwi

    Question about the C5 setting on the KT-LCD3?

    One more time: - the motor has a certain rating, this is the power output which it is guaranteed to deliver by the manufacturer for a specified period of time without getting hot and melting - a 250 W road legal motor must run for 2 hours without getting 2° K warmer at that output - it requires...
  19. anotherkiwi

    Brexit, for once some facts.

    Where the hell is 007 anyway?
  20. anotherkiwi

    Question about the C5 setting on the KT-LCD3?

    Good choice. It will have more grunt than you DD motor with controller at 22 Amps.