Search results

if you post a picture of the BB, I can be sure if it will fit. Carbon frames won't.

that's the problem of political correctness. How are you going to reach people who do not care for the usual political spin? That is because it's not enough to moan about other people, you have to get them voting with you. UKIP uses crude language to reach their audience, Aaron Banks supports...

just turn the bike upside down and measure the bottom bracket shell frame width (between the ballbearings).

The TSDZ2 is made for 68mm or 73mm BB shell frame width while bikes fitted with PF30 and PF41 can have wider BB shell frame width, so measure the BB shell width on your bike to be certain. There is also another problem which is the BB shell diameter. The TSDZ2 is made for 35mm but will fit 36mm...

I am a little fed up with the politics of fear and division. I have been watching the US election last night, glad that the democrats have regained the HoR.

LCD: row of 3 sockets under the LCD for connections of brake sensors, gear sensor, throttle etc. Side view: the LCD is neatly mounted without rubber rings. front view: backlight is very bright. On/off switch by simple quick press on the power button. simple wiring: If you have...

some sobering comments from the FT: "For far too long British politicians, journalists and voters have enjoyed a patently distorted vision of the nation as indispensable world player. Now the nation is facing the painful truth that the UK is not as pre-eminent as it has liked to believe. For...

Channel 4 biggest survey: 54/46 to remain. the debate is still on. You should watch it.

We can plug the same gear sensor for the Krieger to the VLCD5, but the torque sensor inside the motor is so fast, you'll get used to reduce the pedal pressure when shifting in a few minutes.

I'll post some more pictures tomorrow. It's stealthy alright and it's easy to route the LCD cable inside the downtube, just drill a 10mm hole. You don't have the concentrator of the Y1T 4 cable, the LCD cable runs straight to the motor and is terminated by an 8-pin plug. I am waiting for a new...

does it matter if the money comes from his pockets or donations?? next time, the law will be tightened.

some pictures of the 16.5kgs STDZ2 test bike. One word of warning: if you have cable guide under the bottom bracket like on this Giant, it'll be a little fiddly to fit. Take the rear wheel off before fitting the motor.

I suggest that the EU will force the ROI to accept some sort of wording to confirm the good intentions of all sides in the withdrawal agreement toward keeping the border free and unmanned but eventually, if and when there is a trade deal concluded during or shortly after the end of the...

until there is a second referendum, the will of the people is to endorse brexit.

I wouldn't bet on this. NI is used by both sides to justify their negotiating stance until a deal is concluded. At the end of the transition, unless the UK reverses brexit, there will be a land border between the EU and the UK in NI. It is up to each side to police their territory. Both sides...

Hi Gordon, How about converting your bike with the TSDZ2 kit? It has a torque sensor, rides very much like the bikes you have tried and costs a fraction of the cost of brand new bikes. http://wooshbikes.co.uk/?cdkit#tsdz2 It's easy to do, if you can take the bottom bracket out, then you can...

we may have to do that after the transition period but it will be our decision. That's the will of the people.

take back control of immigration.

what are you talking about? if Halfords have them then most LBSes have them. This is the inner tube for the Woosh Petite: https://www.halfords.com/cycling/bike-parts/inner-tubes/halfords-schrader-bike-inner-tube-for-24 If you are 5ft 1, then 24" wheels make sense. It brings the same speed...

I am happy with the UK staying in the customs union until a new more permanent deal or second referendum.