Search results

middle England? they don't even like tourists leave alone immigrants.

do you watch escape to the country? that would illustrate why middle England voted to leave and it's not just to escape the rat race and pollution of London and large cities.

Hi Damian, We do keep them in stock but there are plenty of good tyres on special offers from CRC, Halfords, Tredz, ebay and amazon. When you remove the wheel, take a coupe of pictures to help you remember the positions of the washers from the left side as well as right side. Unplug the motor...

leavers only need to understand some of the issues of remaining, that's enough for them to decide that they'll take the chance to escape those issues. Remainers have never explained satisfactorily how the EU intend to solve those issues (refugees, mass migration, ever increasing EU budget...

that may be the result of remainers feeling the need to explain why it's better to remain whereas brexiters can't see the point of remaining so can't be bothered with point by point arguments.

these people still can't agree among themselves on which brexit after more than 37 thousand posts.

there will be a deal, the big businesses need a deal, even if temporarily. We need the transition then EFTA membership.

MXUS XF07? YTW-06 has lower weight (-1kg) but it's an unnecessary trade-off where weight is not so important.

good find SW.

I take sometimes the ferries from Portsmouth to Ouistreham. The queue at the Ouistreham exit is typically between 1 hour and 1 and a half. That's because there are only a few arrivals in the day.

I thought the argument for the clock change was because of the benefit of starting the day early with the summer time clock.

If I understand correctly, you have bolted the rotor on top of the black plastic blanking plate - that's caused the problem. yes, you have to remove the plastic banking plate. It's there to stop the bolts hitting the innards of the motor. Remove it before installing the rotor. They are...

You need to re-arrange the washers to line up the rotor. Can you post a picture similar to this one? Usually, if you have disc brakes, the steps are: 1. turn the bike upside down, it's easier that way. 2. loosen slightly the M5 bolts on the caliper so to help with aligning the rotor. 3...

Raab is an idiot.

they can and will vote against any deal involving long term customs union. The EU also wants to work out how the UK can leave their customs union, however unlikely.

testing and replacing a Hall sensor is not a difficult job but you do need some tools to make the job easier. Testing: I use a breakout cable at the 9-pin connector but you can do the test at the controller's end. The Hall sensors are usually grouped in a 5-pin connectors, they are 5 thin wires...

it is not cherry picking but realistic. There is already broad agreement between the two sides. It is clear that we want to stay in the customs union for as long as possible while the words 'customs union' are scrubbed from the draft treaty. The point still in negotiation is how the UK can...

they can always do a mini-deal before March.

latest polls: In hindsight, do you think Britain was right or wrong to vote to leave the EU? right: 41% wrong: 47% undecided: 12%

there is a typo in the link in post #1 Try this: http://www.freeflowtechnologies.com/