Search results

http://wooshbikes.co.uk/cdkit/BBS01Manual.pdf and watch these 2 videos: youtube.com/watch?v=akA1vg5fcwY youtube.com/watch?v=irmyv9G9WyU installation is easy, you need to remove the bottom bracket first. That's the difficult step. Sometimes, rust makes it difficult to remove, you may need a...

I agree. We come from well behind, if I were in her place, there is no harm in trying though and that will shut the mouths of the ERG a little while. At the next brexit cabinet meeting, she will be able to tell Fox and Raab that the going is much tougher than they think and competing with China...

what goods? we only have loans and insurance for sale. Oh I forgot, we also have laser guided bombs and small jets.

that's not difficult to understand. Our side is still fighting on why we should leave, theirs has only one purpose: they want the bar bill settled and in return, give us 2 years to do a deal (or cancel brexit).

I agree. The noise level is about the same between BBS01/02 and TSDZ2, the TSDZ2 is slightly quieter but higher pitch. The main difference is BBS01/02 use cadence sensor, the TSDZ2 uses torque sensor. TSDZ2 LCD...

The yellow plug has signal, 5V and ground pins, the red plug has only signal and ground pins. There is no extra cost, it's just that I have to order them specially from Julet and the minimum quantity is 100 pieces. HWBS used to be popular until about 3 years ago, the stick on hydraulic brake...

the special lead is only needed for drop bar bikes where you want to keep the STI levers. customers converting bikes with drop bars change often to straight bars or not bother fitting brake sensors so the special cable is rarely needed. For bikes with hydraulic brakes, the hydraulic brake...

there is really no need to justify the UK's decision to leave. Especially if we have to make large concession a little later for a trade deal with both the USA and EU as a matter of urgency.

the Lishui controller only needs one wire (grey) for the brake signal. You will need a new trunk cable with 3-pin yellow brake sensor connectors like on BBS01B kits. I don't have them at the moment, they need to be ordered specially from Julet.

Some of the bikes have a long wheel base, so suitable for up to 6ft3, the Big Bear, Zephyr, Rio FB/LS are all suitable. We supply a long seat post (400mm or 450mm) for those who are over 6ft.

social media changed that. They spread negativity. Many speak English with a forked tongue.

you have greater motor diameter in geared hub and DD motors: CD motor diameter is kept small because of the typical arrangement: it's squeezed into one side of the gearbox, typically 12cm in diameter, 8 poles. Geared hub and DD motors can have much larger magnet ring, more poles. Their...

nowhere more obvious than the power of Hollywood, science fiction films. They also make the world learn English through karaoke. Then there is the dollar that dominates the world of banking and commerce. The EU threatens that empire.

No pain no gain. ride at a fixed speed, where the motor is at its peak efficiency. That is typically one third lower than its noload speed, eg, if the noload speed of your geared hub motor is 23mph, then stick to 23 * 2/3 = 15mph.

the days of the old model British Empire are truly over. Capitalistic empires are multinational companies, the likes of Apple, Oracle, FB, RBS. Political empires are more likely built by socialists, Russia and China today, India and South Africa tomorrow.

the rack (supplied and fit) costs £25. You can choose any rack you want, plenty to choose from on amazon and ebay, but if you want to have a high load pannier rack, you will need a new seat post clamp with rack mount, this is because the frame does not have threads for the rack arms...

the bike is fine for 16st, height wise, I would recommend for riders up to 6ft. Over 6ft, the Oxygen may be better.

This rack is the one we supply and fit:

Hi Dave, I am sorry for the delay. I'll phone them in the morning to see how things go. Tony

the Express is the most awful propaganda organ for hard brexit.