Search results

then we would compensate them for their losses until a deal with the EU can be reached.

I think that the answer is unequivocally yes. Divorce bill and ECJ defending citizens rights are not normally in any trade deal.

that is totally uncivil and unnecessary..

the courage is in the number of hours and years oldtom. I thought you could have understood what I meant, but perhaps you chose not to.

'there-is-no-moderate-centre-ground-when. oldtom is around'. that's a simple observation. you see too much into that, oldtom. You see fascists everywhere. For someone precise in the use of the language like yourself, your last post comes through with an implied insult for the stupid electorate...

it comes as one unit. Let's leave that option to last. Cost: £42.

Kungteng electronics http://www.szktdz.com/en/

it won't look right to have two different types of levers. Try to pad out the oil reservoir with playdough to make a flat area where you can stick the sensor on for now. I'll look into how to fit the brake sensor to the M395 tonight after dinner. These sensors are not a perfect solution...

women liked his cuddly pudgy face?

which model of shimano brakes do you have? I may be able to make a piece of plastic to fix it for you.

I was quite content watching star trek.

when oldtom is around. of course there has always been. otherwise the world would be continually at war if left to oldtom and the fascists alone.

connect it (red plug to red plug) and switch on the LCD. You should see error 25, brake activated. Now move the small magnet ring slowly toward the sensor's head. Keep watching the LCD. When the magnet is near enough in relation to the sensor head, the error 25 on the LCD will clear. Make a...

next bike you build, it won't take that long.

No. Would Labour get elected at the next GE without Blair? Possibly but I don't think the UK will vote for a socialist government, ever. So whoever will lead Labour to victory, I don't think he/she is going to be hardcore socialist.

as the front derailleur is seldom used, can't you just move the left shifter in a bit, so the throttle can occupy its place for now?

Put the throttle on the left hand side for now. I'll ask Andy for a new Wuxing one later when he gets back from his lunch break.

the right dropout does not seem to be as snug as the other one. You may need to add a 12mm torque arm (not 14mm) to that side. Don't forget to slide the metal coil spring back about 5mm into the motor axle.

Crank drive bikes are not exactly suitable for heavy people. The stress and strain on the motor is inversely proportional to their cadence. If they struggle on hills at less than 30RPM-40RPM, I bet you half of the battery will be turned to heat.

or buy votes.