Search results

After wiring to the ecrazyman controller,there are no longer any connections to the ezee battery condition monitor,i know advice to tape over it as it is not very accurate has been given in the past,but out of interest could it be wired direct to the battery,also can the lights be wired direct.

I finally got to try out my torq 2 with the 36v ecrazyman controller fitted today,i was really looking forward to trying it as the no load speed was so promising,it is reaching 51mph with the wheel off the ground compared to 24mph with the original controller,on the road it seems to have very...

I am thinking of running my torq 2 at 48v with lead acid batteries,is it likely to make much difference to the hill climbing ability or would it be more on top speed only, would using four batteries help reduce the amount of stress put on the batteries.

Has anybody connected an ecrazyman controller to a torq 2 trekking or ezee kit,i have tried wiring blue to yellow for hall sensors and phase wires as suggested for the ezee sprint and bafang motors, but although it sounds like the motor is moving smoothly nothing happens,also tried connecting...

After many frustrating hours spent changing a rim on a wisper 905e,only to end with the bike no longer working at all,imagine my horror when i switch on my torq 2 and find it is also dead,it is showing a red light on the battery meter,the controller shows very quick flashes,of seemingly random...

My latest toy,a wisper 905 works is showing no power at the meter,all was working ok after removing and replacing the rear wheel rim,however after sqeezing the controller back into place i have no power at all,there are a few loose wires from the controller,2 0r 3 blue wires and one red wire,is...

The light on my charger has stopped going green to show that the battery is fully charged,the red charging light is staying on,how can i test with a multi meter if its the battery or the charger at fault,i am a little unsure of where to turn the dial on the multi meter, to check the charger amps...

I am pleased to see that some suppliers are now offering a good choice of electric bikes for sale,previously the only option was to visit the tour de presteigne to try out a selection of bikes,sold by exclusive dealers,at last there are some shops selling a good range of brands all year round,i...

I have for sale a new and unused potevio lead acid battery,i bought four from ebay at a good price and only needed three, so one is surplus to requirements,any offer considered as it is just in the way, i am located in birmingham.

I have now sorted out lead acid batteries and a charger for my torq,next problem i face is what type of connection would you use to connect the lead acid batterys to the ezee battery terminals or would you by pass them,also what type of wire would you reccomend to connect lead acids in...

36v lead acid battery wanted,at least 12ah.

36v lead acid charger wanted.

My ezee torq 2 battery is dying,it just about makes a 4 mile round trip,that is if i only gently use the power to help out on the hills, and keep it in restricted to 15mph mode, anyway i can't justify the £400 pounds for a new lithium battery with the amount of use it gets at the moment ,but i...

The wire coming from the front light on my torq is hanging loose,anybody know where to recconnect it to,thanks in advance for any help.

why is ebikebay still listed among the advertisers.this site must have been inactive for close to one year now.

Anybody know where i can purchase, a simple handlebar mounted on off switch,my bike is derestricted but i would like to limit the extra power output to when needed.

Using this forum for drawing attention to members own bikes for sale on ebay should be banned,especially if you are an electric bike dealer, ok if you are a private seller and advertise on the forum first and get no response within a week,and then say the bike has been put on ebay is ok,to...

Anybody suggest the best single chainwheel for my torq 2,it is presently fitted with a 52t wheel,which is more suited to outright speed,i would like to still be able to pedal at 20mph on the flat,at present i could easilly pedal at 30 mph downhill , but i start hitting the brakes after 25mph...

I was thinking it would be good, to add a couple of short one lap races to the event,you could have a throttle only race with no pedalling allowed,and a handicapping system to ensure all bikes carried the same weight,you could have a flat race, and an uphill race it would be very interesting to...

Thanks to fleccs torq pages i have now derestricted my torq 2 (at one time it was stated that this model could not be derestricted),but on mine it was the same as the older torq derestriction instructions.remove the battery and turn the bike upside down,below the crank there are a couple of...