Search results

I owned built and owned this until last year where it was sold. Since then the motor has been cooked and controller shorted (fets) I had been asked to repair it, but due to the faults the owner has decided to sell. 24s 10ah lipo...

It is a 2007 model that has only covered 1242 miles from new. I bought it from a Vectrix dealer who used it travel around his gated holiday estate. This is in absolute joy to ride, especially with the twist regen on the throttle. I have upgraded the software to Lairds version which has...

Kona Stinky Large Frame Custom designed/machined Torque Arms Custom deisgned/machined battery case Pro Wheel 19” JRH rims 2.5” x 19” matching tyres Shimano XTR hydraulic front brake Hope rotor DMR Convertible hub laced with 13g JRH Sapim spokes and matching nipples MXUS 4t laced with black 12g...

Bought and only used once. 240w charger. Was bought to charge a 12s lipo setup (50.4v from memory). £35 delivered.

As new and in very good condition throughout, see the side of the motor, still has the plastic film on it. Turnigy 12s 5ah lipo BBS02 Fitting tools Triangle bag Bulk charger This is a plug and play system. Everything has been done for you, the battery connections connect with EC5 plugs...

Lyen 12fet 4110 fet Extreme Modder. No case. 14cm x 70cm x 2.5cm Max voltage 100v (24s lipo) Max amps 45amps Comes with programming lead. Upgrades 12awg silicone wire on Power Leads 10awg silicone phase wires Silicone hall sensor wires (unterminated) Plug added on the ignition wire to add a...

Minimal use as you can see and well looked after, GT85 applied on a rag prior to most uses (and on most of the bike!). I have installed a temp sensor which was used with a CA-V3, then 50 miles on an Adaptto Mini. This does not have the stamped stator but the more desirable cast stator. The...

Brand new and still in packaging. Bought these as a second set for another project which isn't going to happen now. The holes in the rims are drilled for bike front hub and for a hub motor on the rear. No incorrect spoke angles! 1 x front 1 x rear I paid £165 plus £40 customs fees. £150 Plus...

Just order 5 of these, should be here by mid December. These PSU's are tiny for the voltage output, could be used for onboard charging. http://www.hardware.com/eu/products/eaton/APR48-3G If you would like one, please let me know and I will put one by for you. £130 Plus postage. I'll use...

Comes with programming cable. Upgraded 12awg phase wires Upgrades 22awg hall sensor wires £75 delivered to the UK. £70 plus postage elsewhere

Covered 21 cycles, all cells in excellent condition and never overcharged/discharged. The pack is made from Turnigy 5s 5000 20c packs. Pictures will be uploaded soon, having problems with the camera :/ £150 delivered to the UK paid via Paypal as gift/fees covered, bank transfer. PM for EU...

Covered 21 cycles, all cells in excellent condition and never overcharged/discharged. The pack is made from Turnigy 5s 5000 20c packs. Pictures will be uploaded soon, having problems with the camera :/ £170 delivered to the UK paid via Paypal as gift/fees covered, bank transfer. PM for EU...

Excellent condition, around 21 cycles from new. Comes with the upgraded Low Profile mount. £60 delivered to the UK paid via Paypal as gift/fees covered, bank transfer

Immaculate condition, only covering 500 miles on a road bike. BBS02 v2 bought from custom-ebikes.com (still in warranty) £340 delivered (http://www.custom-ebikes.com/bafang-bbs02-750w-mid-drive-motor/) Alloy Shell 48v charger (setup for 12s lipo) £40 delivered

These have been sitting in the drawers for a while, and only plugged into a lipo to check for full functionality. They are the ones bought direct from Methods due to having superior accuracy over other Chinese models. Selling for what they cost @ £15 each plus postage.

Mint condition, with only 500 miles on it. Bought this to commute to work and has been completely faultless, I have now gone back to over volted/amped hub motors :twisted: 2013 Cube Peloton - 61cm frame BBS02 48v 750w 12s 5ah Lipo Top speed - 30 mph Distance - 12 - 40 miles. Totally...

New and unused, not required due to changing the charging setup. The setup is for a 20s 2p configuration. This is a £270 setup (http://www.jozztek.com/shop/8-battery-management) There are also bus bars I will include in the sale, so it is plug and play with JST-HX lipos. £150 + postage

Brand New, only ran a charge through it today to check everything is as expected. Comes with everything you see in the pictures.

These are used to program the BBS02 as seen on some threads over here. Can supply the driver and Bafang software. £25 delivered paid via Paypal as gift/fees covered, or bank transfer

Listing this for a friend. The bike is 3 years old, the kit is around 12 months with barely any miles on it (hence sale). Took it out today and done 10 miles (pictures are from today). The charger is charger and power supply comes with the bike, so this makes it a complete bike ready to go...