Minimal use as you can see and well looked after, GT85 applied on a rag prior to most uses (and on most of the bike!).
I have installed a temp sensor which was used with a CA-V3, then 50 miles on an Adaptto Mini.
This does not have the stamped stator but the more desirable cast stator.
The wheels were built by a professional builder using quality spokes.
I wheel leave the Hookworms on as well as the tubes. I am 99% sure I fitted tyre liners too, to make them practically puncture proof.
The cassette will also be left on, again something that took a while to source.
£320 plus postage costs, paid via Paypal or Bank Transfer.
I have installed a temp sensor which was used with a CA-V3, then 50 miles on an Adaptto Mini.
This does not have the stamped stator but the more desirable cast stator.
The wheels were built by a professional builder using quality spokes.
I wheel leave the Hookworms on as well as the tubes. I am 99% sure I fitted tyre liners too, to make them practically puncture proof.
The cassette will also be left on, again something that took a while to source.
£320 plus postage costs, paid via Paypal or Bank Transfer.
