Search results

905 Freewheel I thought I should add the following to the advice given in the above posts: The pins in both type of plug connector can be removed by carefully easing back the locking catches within the plug housing (black 8 way type) or on the pins (5 way type) and sliding the pins out. A...

Wisper rear light Vikki is correct. You will need to remove the two screws at the back of the light and then replace the 4 AAA batteries. Norman Wisper Service wisper.service@wisperbikes.com See the whole range @ wisperbikes.com

Pedelec sensor Sorry to hear you are having this problem. The pedelec sensor depends on a good fit between the disc containing the magnets and the bottom bracket (pedal) axle. This is achieved by a series of small teeth moulded into the centre of the disc that grips the axle. This...

Wisper brakes Just to confirm Davids earlier comments we are investigating this problem as a matter of urgency. I would strongly recommend cleaning braking surfaces both on the discs and rims of new 2009 model Wispers before riding the bike for the first time to ensure any manufacturing...

Wisper brakes Just to confirm Davids earlier comments we are investigating this problem as a matter of urgency. I would strongly recommend cleaning braking surfaces both on the discs and rims of new 2009 model Wispers before riding the bike for the first time to ensure any manufacturing...

Wisper 905e Some of the earlier Wisper 905 bikes do have unused connectors on the controller which are deliberately left unconnected. Please do not try to connect these together. If you would like to contact me please at: Wisper.service@wisperbikes.com I can provide further assistance...

Wisper 905se Seeker If you would like to contact me at: wisper.service@wisperbikes.com I will help you resolve this Norman Wisper Service

Problem around the pedals I have replied to your E mail with some information to hopefully help sort this problem out. Norman

I will send you a PM regarding this Norman Wisper Service

I have sent you a PM to assist with this problem regards Norman

Apologies to any customers who may have received the modified levers with a 3 pin connector. Please send me a PM with your address details and I will send you the correct lever(s) with the two pin plug. I can also provide some replacement springs for any that have failed. Norman

Ruy I have sent you a PM. regards Norman

Wisper brake pads Mike - I have sent you a PM re the Zoom pads. Also just to let forum members know that I have a good stock of the Promax pads that can be purchased by contacting me through the Wisper website. Norman Wisper Service

Rose Hi its Norman from Wisper Service I have sent you a PM