Search results

We purchased a new motorhome in March last year and faced a similar dilemma to yourself. My wife purchased an Emu step framed ebike and I built one using a new Carrera Subway 2 bike and a Yose rear hub kit and I had a towbar fitted and use a Thule bike rack. When we went away last year we used...

I initially purchased for my Carrera Subway 2 fitted with 27.5 wheels a Yose Power 700c rear hub kit and purchased a 700c disc front wheel from Halfords. After running it like this for some time I rebuilt the rear motor into a 27.5 rim with new spokes and refitted the original front wheel as I...

Hi and welcome, nice looking bike even with the mudguards.

Great idea and good website, hope it goes well for you.

Hi, just wondered where you purchased your kit from?

I would spin it by hand first and if it is not spinning freely I would remove the brake caliper to see if it made any difference. Normally if the brakes are binding you can hear them.

Wife always wants an electric hook up when were away in our motor home so no problem charging our batteries. I have the same Yose Power kit as yours.

Listening to those two we should just buy a ready built bike then!

Hi and welcome both of you.

I have seen a few F/S bikes built with a kit but as you say very often there is not enough room for the battery. Just trying to do a bit of research and see if it is possible to build.

Just wondered how a kit such a Woosh or Yose compared power wise, torque etc with a manufacturers built bike eg Haibike, Specialized, Giant etc. A mate of mine is looking to purchase a F/S mountain ebike with one of the usual Bosch, Shimano or Yamaha motors around £2500/£3000 and I just wondered...

Just a quick update, sent Yose an email last Wednesday and received a reply from Winona Thursday saying they would send me a new PAS. This morning Fedex man delivered a package with a new PAS from China, now fitted and just been out for a spin and bike working great. Excellent service from Yose.

Still advertising on ebay as well.

Thats a nice looking bike, did you convert it yourself and just wondered what kit it is? No such luck for me, waited in all morning for a bathroom suite to be delivered which I will have the pleasure of fitting only to find out at 1.15pm but its going to be delivered tomorrow.

I will give them a try tomorrow thanks and let you know. Everything worked fine before I rebuilt the rear wheel.

Just sent an email to Yose asking if they can supply a new PAS as only purchased the kit in July 2018. I will see what they say but everyone else appears to rates their customer service.

I am a road club cyclist who in the spring, summer and autumn (warmer weather and older age) cycle anything from 100/150 miles a week with some 70/100 miles rides, Sportives and Audaxes thrown in for good measure. I ride a Van Nicholas titanium road bike amongst others but last year my wife...

Good idea ref GaryMc and I will contact Yose for a warranty replacement as kit was purchased last summer and bike only covered 260 miles.

Yes enough free space between crank and PAS as had to fit a longer bottom bracket to allow fitment. Just been looking at the settings and everything appears OK.

Just had the bike upside down and works fine on hand throttle but cuts in and out when pedalling, checked connections and removed crank arm and check PAS but everything appears OK and inner park of PAS turns when other crank turned. Is a faulty PAS the likely outcome? Thanks Alan