Search results

Sorry for the delayed reply guys; thanks for the advice so far. Took the controller apart and have continuity between the negative & positive wires to the 3 phase wires. So I believe the controller might be ok. Battery is currently at work with bulbs wires up to it to slowly discharge it -...

Chesterfield. Unfortunately don’t have another bike to test on. Bike does show 54.8v but just a red battery icon.

Anyway I could test for that? PswPower.. only got it in September and done maybe 250 miles tops?

Hi All, Wondered if someone could point me in right direction. Been out on the bike today - with what I thought was a fully charged battery. Did approx two miles and the motor started jolting; I noticed the battery indicator was dropping fast then just turned to a red icon. At first I...

Hey! The SRAM adapter didn’t work as that actually converts it to 24mm (iirc) suitable for the SRAM Hallowtech bottom brackets. The FSA one did work - it did take some fitting (used a thick metal bar, nuts / washers and a plate to press into the frame) but once it was fitted it was the correct...

I could be wrong here as I’m no pro.. but I think the ID of HT BB is 24mm so too small.

Looks a good build! Are you by any chance selling the 36T Bling Ring.... in the market for one..

The original chain ring was 32T by the way.. if that helps.

Again big thanks both for the feedback - if I can get two years out of this battery I will be happy; only cost £220 which was cheaper than most none branded batteries on Ebay. Started the build today; Old crank out PF30 out Thought I'd purchased the right SRAM PF30 --> BSA adapter but it...

Many thanks for the feedback - didn't realise that about the Samsung cells. I thought I was doing the right thing going branded... Ordered the stabilizer bar! Exactly what I was looking for.. I brought some sheet metal home from work but there's no way I'd be able to make something as nice as...

Hi, I’ve purchased a boardman 29er Pro 2016 to convert to an e-bike. I thought the only thing I had to worry about was bottom bracket size (which I measured before purchasing) but clearly I was wrong! The frame uses PF30 BB so I’ll need an adapter to convert it to BSA. From what I’ve read...

hi all! Many thanks for accepting my registration. Had my first go on an electric bike today and caught the buzz definitely. I have a Specialized Hardrock bike that I’d like to convert to an ebike. I’m a big guy (6ft 1in and 120kg) so I guess I’ll need something with a bit of grunt. I’d...