Search results

I run a 36v bs01b, I fitted a 42t front cog to cope with the steep hills on bridleways around me, there have been no issues with any hills on roads, even pulling my trailer. The kit came with a 46t cog IMMSMR. I tweaked things like the Keep Current and current control settings for a better ride...

Or, if you still want plugs, cut the appropriate end off the old throttle and solder and shrink that into the line.

that could be confusing, where to actually engage then? Perhaps he's from the Dully Fail or one of the others not concerned with truth, only sales.

You need to post this somewhere more obvious, it's hidden at the end of a thread. Hope you aren't just chasing knocking copy though. What paper is it for?

I'm also the proud owner of an ikea trailer. I pull it with my converted hybrid bbs01b, 42t front cog for the hills round here. I recently put a kit on my old brompton, tried the trailer with that, works a treat, certainly on the flat, not as much poke on the hills as the hybrid. I'd say stick a...

Just had 5ltr paint delivered. Can was properly dented, lucky it didn't burst. Could have been packed better by Rawlins, treated with care by FedEx. It's obviously been chucked about.

Just tried out the e Brompton conversion with my trailer, no problems at all, apart from not having enough power to get up a short steep cobbled lock ramp, that needs bottom gear and full power on the mid drive hybrid. I thought there was a thread for just posting pics of bikes out and about...

I have schwalbe studded tyres on over winter no problem on tarmac etc, just a little noisy. Worth it for the security/safety .

Great idea, but nothing costs nowt, is it viable long term?

Nowt wrong with his answer, that's what he wants to do, his choice. @k1s1 So the solution is to get a male and female connector already wired and solder them into the loom so you can unplug it. If you are really good at fine soldering, then wire new m/f connectors direct. I had to...

Why not take a file or angle grinder to the ball and level the flat. That would be easiest if that is the problem.

Just remember, it will never get better if you pick it! What a cracker of a joke eh?

If I folded my e- Brompton and fitted the cover no one would know.

I do roadside repairs, also carry a spare tube. I have QR axles, with a centre stand on the bike I can get them out without inverting the bike. I have a Rehook tyre tool, brilliant bit of kit for getting tyre on and off, I carry a small set of tools, enough to repair most problems. The Rehook...

Do keep up lad...

What about increased weight and drag? It would be easy to get uneven thickness, one half of the wheel might be heavier, causing vibrations.

Who sees it when you are whizzing by?

Here's some pics of the little bag that fits the woosh controller. Aptonia Nutrition Bag

Yes but not for a little while, it's on my narrowboat, going moving it next week. I didn't buy it through Amazon or eBay or I could've found it. Re the bottom bracket, I have a '99 Brompton, as far as I can be certain, with the 6-speed Sturmey hub. I had to get a new bottom bracket - then of...

I found a little gel pouch bag, can't find the purchase info though. it's just the right size, fits on the handlebar tube.