Search results

OK Thanks again for the help With my manual I had no idea how to get to the P & C parameter settings, however I found a good one published by bizobike, so I have been able to get in and make some changes, which has now given me a running motor with PAS. At the moment I have the bike hung up in...

Hi thanks To be clear I tested with the PAS on the PAS wires And then a second test on the throttle connection I shorted the red to signal as per your earlier suggestion to simulate full throttle The KT controller does not seem to have the same options for setting up either PAS control or...

OK so now I have got the new KT Square wave controller and display from China and have just tried it Frustratingly I still have a very similar problem The motor runs ok in walk mode but nothing with PAS input Measuring the signal to ground I am still getting a very good 12 pulse per rev...

I did not try that as I have the sealed PAS unit which you cannot remove the magnets Also I’m getting a very good square wave output from the pas even at low cranking speed Waiting for the new controller now Thanks Sivs

Thanks very much Nealh I have ordered the KT controller and lcd3 from pswpower I can see on their website that it suits no hall connection so fingers crossed this will work - I don’t suppose somewhere on the site there is a list of compatible motors controllers etc? Thanks again Sivs

In response to VFR400 note of July 19th My motor runs smoothly in walk mode - no rasping noise, I've double checked all the connections to ensure they are good. I can make it learn forward or backward rotation with the learning wires, but that's all I get, I never get a poor rotation. regardless...

Yes I had the same thing - need to disconnect the self learn before switching off to make it change motor direction

Hi VFR400 Thanks again for your reply I've made the changes to the settings as you suggested, but still with no success (wheel mptor not running with PAS, only when using walk mode) I have also tried: a) setting to throttle and shorting red to white on the throttle connection but still no wheel...

Hi VFR400 thanks for your reply. BTW I always fancied the VFR400 (the one sometimes referred to as RC45? with the twin headlights) great bikes! OK I have tried your suggestion. I connected all 5 motor hall wires and connected self learn wires. When I switch on there are about 5 audible clicks...

Hi Andy, Sorry I cannot help, but your problem looks very much like mine I posted the other day! My issue is I bought a new controller and lcd display as my ebike had a fault (display showed empty battery even though it was OK and it would not run the motor at all) Now I have fitted the new...

Hi, I've been looking at this controller having just bought one myself this item on Amazon may be of help? https://www.amazon.co.uk/Brushless-Controller-Aluminium-Controller-Waterproof/dp/B07RVDW4MV/ref=sr_1_5?dchild=1&keywords=ebike%2Bdisplay%2Band%2Bcontroller&qid=1593961785&sr=8-5&th=1 The...

Hi, looks like a nice forum!. My Panda ebike conversion to my wife's bike has failed, and being unable to get any response from Panda ebikes I've finally tried to fix it myself. The issue I had was that although the battery was fully charged and had 37V the LCD display on the handlebar shows...