Search results

  1. J

    TSDZ2 not assisting from pedals

    I bought two of these and have had many hours and miles of fun with them. I swapped motors as it wasn’t giving assistance by pedalling, the second works just as it should so how to fix? I know it’s the motor as all other components work (it was only the motor swapped - not controller/battery...
  2. J

    Tongsheng TSDZ2 (or installation?) fault?

    Hi Ben, I knew I’d buy another of these and glad I did, I’ll try and waterproof the new one for when (not if) something failed. I checked everything worked before swapping elements with the old motor and it was the sensor that had failed.! Now the screen shows battery level, speed etc.!! I’m...
  3. J

    Tongsheng TSDZ2 (or installation?) fault?

    Thanks vfr400 Thank you for your help and advice, I chose to rectify by buying another.! I’m pretty wedded to this motor, the ride, simplicity and hacks make it (almost) ideal. So, I have No2 here and thinking that I’ll put it together (on the bench) and make sure it all works before swapping...
  4. J

    Tongsheng TSDZ2 (or installation?) fault?

    OK, so I've tested them all and each fluctuates so much that I couldn't tell which was which or even offer an approx figure for each :(
  5. J

    Tongsheng TSDZ2 (or installation?) fault?

    ..thank you. (Please bear in mind I’m a novice) I can check the ring of contacts with one end (with a needle as you suggest), where does the other meter prod go.? (not wanting to short anything.!)
  6. J

    Tongsheng TSDZ2 (or installation?) fault?

    So... I’ll need to remove motor, open it & check the power is getting where it should ?? thanks guys, I am a total electrical newbie (mechanics I can do, electricity is still manic to me though).
  7. J

    Tongsheng TSDZ2 (or installation?) fault?

    Connection and current is fine through the first connection and up to the blue (plug-in) junction, next stop - into the motor.?
  8. J

    Tongsheng TSDZ2 (or installation?) fault?

    OK, the battery is reading 54.5V.!
  9. J

    Tongsheng TSDZ2 (or installation?) fault?

    ordered one now will pick up the other tomorrow, still can't figure why it did work then stop?
  10. J

    Tongsheng TSDZ2 (or installation?) fault?

    ..agreed, there's one at work.
  11. J

    Tongsheng TSDZ2 (or installation?) fault?

    ..it's a 48V 12A Hailong, the controller says 1 bar still but the battery pack shows 4 green and 1 red ??
  12. J

    Tongsheng TSDZ2 (or installation?) fault?

    thank you guys, I've no meter here, so can't check !!
  13. J

    Tongsheng TSDZ2 (or installation?) fault?

    Fitted to a Giant NRS yesterday, it worked (laughed like a fool), rode 10 miles before loosing power, fiddled with sensor and it worked but nothing since - screen showing 1 bar of battery (battery indicator and charger say 'it's charged'). Please let me know of something I'm missing?