Search results

All connected working fine many thanks for all of your assistance

Hall sensor connected 03 cleared motor running well ready for the pas and speed sensor connection instructions

Finally got around to making my initial connections all looks good with the display responding unfortunately I can’t get the motor to run as the display shows an error code3 which relates to Motor Hall Signal Abnormality. I know you had said not to connect the PAS and speed sensor but you didn’t...

Just checking on something. When I opened the wire from my existing controller to the motor I discovered six very fine wires in addition to the three larger diameter wires (blue green & yellow) marked as motor wires. Would I be correct in assuming these are what is referred to as the Hall Sensor...

Are there any drawings available which identifies the Various wires coming out of the controller or is it best to trace the ones from the existing controller to the various parts

Controller arrived this morning ready for install tutorial

Thanks again for the advice about to place the order i will be in touch again when the unit arrives.

More wire connecting is the connector to the controller readily available.

Yes that was the second smaller cable coming out of my C300 display.

what about the drop down box for brakes do I select with normal brake?

Many thanks again for your advice I will certainly need assistance to do the replacement. There are a couple of other drop down boxes which I need to complete. What do I need to set the Brake box to as the brakes are just conventical bike brakes and do I need the HWBS. I think I will also get...

Many thanks for all of your directions I probably have to engage the services of my son with the wiring and soldering. Can I ask for just a little more help with my order. On the Topbike web site there are a number of drop down boxes (screen shot attached). I have changed the display to the...

Many thanks for this do you think a mere rider like myself can handle the rewiring and LCD adjustments required. Could you recommend the best place to purchase the KT controller and LCD3.

Hi What would you recommend as a replacement

Hi Nealh Please see attached Photos as requested. David

I need a Bigstone C300 Handle bar display (controller) I have searched eBay and emailed Bigstone with no success. I was wondering is anyone breaking a Batribike Dash or any other ebike with a C300 handlebar display type C300-1407-A979 36v. Or is there a compatible unit that I could just plug in...