Search results

Having tried Ito identify the intermittent motor kicking in problem without success I reconnected everything and put everything back in its place. With he idea to live with the motor kicking in. Of course since then I have not had the problem and the e-bike is working as normal with no...

Hi I am still trying the avenues you have suggested. 1. the connector where the cables from the LCD and Brakes becomes one does not seem to come apart see photo LB0011. I used 2 pairs of pliers and tugged and I have tried rocking side to side. 2. the connector pin size is quite small and a...

I do not think there is water within the LCD display as it all looks normal and there is no sign of dampness in the display.

I was listening it was just I found it difficult to achieve what you suggested. The wiring is encased with connectors so one cannot see the pin wire colours. Which is why I opened the bottom crank box where all the wiring goes. How would you suggest I achieve your bridging of the red and...

Hi I have tried out some more detective work on the intermittent bike motor moving problem I opened up the controller housing and identified the four wires going to the rear brake light. I disconnected each connector in turn then both. By disconnecting both connectors the dim light...

Thanks for the suggestion. It may take me a bit of time to achieve this option, to see if it helps isolate the problem

Thanks for your replies. I tried disconnecting the cable to the LCD display but of course you cannot see if one has turned don the power. I suspect not as the rear light was not illuminated and the motor did not run. The motor only runs slowly, the LCD display showing 1 or 2 when it does...

Hi vfr400, Yes I have just tried the disconnection of the throttle and the same result. Whilst on that tack I disconnected the rear brake electric cable and the same problem in that whilst on the stand with no demands the rear drive wheel kicks in to drive just for a short while each time and...

My wife's Freego Hawk motor runs without demand even when just sat on its bike stand. Motor kicks in intermittently. The rear brake light glows dimly continuously once power is on. I have disconnected the connector to the rear motor and the rear light still glows dimly. I have re-connected...