Search results

i have read bafang wires are set out diffrent from kt on the brake sensors i have bafang leavers with built in sensors an juliet extention leade and a box of conectors suitable for the kt controler as i understant it if i conect it all together red may not be positive , black not negertive and...

i'm looking at 48v 13ah these all seem the same hailong case with what ever logo on but how do you pick a good safe battery and charger are any better than others .all around £200 i found this but its £60 more https://www.ebay.co.uk/itm/363802317427 is it the safest option

i know things used to be cheap from china but i dont think its the case now has it all changed hailong battery aliexpress £143.32 + £48 shipping and if you scearch long enough on amazon and ebay you can find them for 2 or 3 pound more i have found this to be the case for displays an...

when changing leavers is it coman for the hose to be stuck in the old leaver where the olive has been done up ,an expanded so it can not be removed, i have had this on a rear caliper and im soon to swop the leavers for ones with switches in them, i thought they would of been like pluming or car...

what would you choose and why for me i would not choose front hub 1 .least weight over front wheel and 2. if you lost traction on a corner you cant out steer it mid drive i think it would put to much strain on the drive train, but be ok if belt drive rear hub the one i would choose because the...

can i use ktlcd8h to set up a bike then take it off an use another kt display like led 880 an the controller keep the settings the lcd8h set .im thinking its easier to use the menu on the 8h than the lower modle number ones but this is not from experience just what seen on youtube , are the...

i would like 250w rear hub motor in a 29" wheel to take a 11 casset i would like to use KT controller i would buy a kit or just wheel not sure what size battery for 10miles eachway everyday kt controller is what it has to have we will have a few ebikes in the family an im keeping to kt so if...

on the Suntour HESC rear hub it has 3 large wires blue yellow green and 5 small red black blue yellow green white, the white is a speed sensor . the kt controller plug for the speed sensor has red black & white can i just use the white signal wire from the hub as it already has it power...

can any one recomend any books like The Ultimate Do It Yourself Ebike Guide: Learn How To Build Your Own Electric Bicycle Paperback or DIY Lithium Batteries: How to Build Your Own Battery Packs by Micah Toll i have seen some of his videos on you tube an he seem a good clear source of...

are KT controllers the best option to go for. im new to ebikes my dad has used them for a number of years but i have not had much to do with them looking at parts there seem to be a really good selection of bits for KT system i have seen ebike kits mainly looked at rear hub motor kits an some...

my farther has a cube with bosch mid drive an belt drive nuvinci hub with harmany sync the hub went wrong a few times an had to go back to germany i think for repair under warranty which has now expired my dads is 73 an really liked the bike went out for miles everyday sometimes 3 times a day...

i have seen pas fixed on with what looked like chemical metal is this the way to do it or can you undo the bb an fit it like a washer on the cartrage so its held to the frame also what size is the average bb where the rotating magnets would fit over mine is 16.80 on the round part or max size...

i have a carrera subway it has a nominal 250w max 400w hesc sr suntour rear hub ,20a Kt controller ,lcd8h display , am i better off with a 36v or 48v battery i have some steep hills near me what ever direction i go worst being nearly 1 in 4 im about 20 stone may be more but i may drive to...

hi i have a 2020 subway E brought it with a dodgy battery bms is damaged so i plan to fit a kt36/48svprd-hd01 controller with a kt lcd 8 or 3 display im not sure if my crank sensor is compatable as it has 4 wires the controller has the 9 wires for the motor an 1 is speed sensor so i think this...