Alternative Display and Controller for NCM (DAS-KIT)

[Djscsc]

Hoping to also to learn the easy and cheap way to unlock the settings 9n my ncm Hamburg with L6 display and x15r motor. Please share

 

[saneagle]

Hoping to also to learn the easy and cheap way to unlock the settings 9n my ncm Hamburg with L6 display and x15r motor. Please share

Change the controller and the LCD for better ones, then you will be master of your own destiny.

 

[Djscsc]

Hi @jokskot, can you pm me your wisdom too. @jokskot

 

[Bram Van den Bossche]

There is no need to change the display. Increased cut-off speed, better accelaration and removal of the 25 -> 20 kph flat spot are all achievable at much less cost than fitting a new display. I have sent you a pm about this.

I have an NCM C7 and would like better acceleration and removal of the 25->20kph flat spot. Increased cut-off speed would be nice to. Will you please sent me the way to achieve this? Thank you a lot!

 

[jokskot]

I have an NCM C7 and would like better acceleration and removal of the 25->20kph flat spot. Increased cut-off speed would be nice to. Will you please sent me the way to achieve this? Thank you a lot!

Hi Bram
I've pm'ed you.
J

 

[Asdrtuio]

Hi Bram
I've pm'ed you.
J

Can you tell me how to make mine go faster

 

[jokskot]

Can you tell me how to make mine go faster

Please contact me by pm (messages on this web site)