Bafang BB Torque Sensor

[CueBall]

I am having an almost impossible time locating a replacement Bafang bottom bracket torque sensor.

It is a Bafang SR PA232.32 ST (73mm) for CAN with round 6-pin connector.

It's for a Carrera, the 2024 spec model with the battery mounted in the frame. Halfrauds are about as much use as a chocolate fire guard as usual, they can't even get parts for bikes they still stock and sell.

Does anyone have any suggestions or alternatives that might work on the Bafang CAN system?

 

[joelectric]

You would need to get someone more knowledgeable on the forum to confirm the fitting is correct
but have a look at this

Bafang Torque Sensor Ebike Power Assist Sensor Center Axle 68mm-73mm | eBay UK

The plug is 6PIN plug. This shaft torque sensor requires a dedicated chainring bracket.

www.ebay.co.uk

 

[CueBall]

You would need to get someone more knowledgeable on the forum to confirm the fitting is correct
but have a look at this

Bafang Torque Sensor Ebike Power Assist Sensor Center Axle 68mm-73mm | eBay UK

The plug is 6PIN plug. This shaft torque sensor requires a dedicated chainring bracket.

www.ebay.co.uk

I have looked at that, unfortunately that is the SR PA231.32.ST, whereas I need the SR PA232.32.ST - The difference as far as I can tell is in the crank fitting in the frame, as well as the whole chainring assembly mounting and securing.

But that you for taking a look.