Bafang clutch

[esuark]

As above a member on here did exactly that soaked his clutch in some degreaser or some such liquid to get his working worth a try.....

 

[Tortus]

Try working some 3in one oil down into the clutch and wiggling it back and forward. Sometimes it works.

Got it steeping in degreaser, will leave it for a few days.
Thanks

 

[Tortus]

As above a member on here did exactly that soaked his clutch in some degreaser or some such liquid to get his working worth a try.....

I just wonder if the springs are rusted away? saying that I cant hear anything rattling when I shake it.

 

[Tortus]

If the connector is a std nine pin Julet then yes. All of the AKM's use a two stage gear set so internal hub gearing won't be too dissimilar.

Topbikekit do their own make as there is not an AKM 250w cassette model that I can see.
2.1KG TBK-100AD CST Cassette 36V250W EBike Rear Driving Hub Motor 32/36 holes

 

[RogerA]

AKM-100CST Cassette 36V250W EBike Rear Driving Hub Motor 32/36 holes [AKM100CST EBike 36V250W motor] - $99.75 : Zen Cart!, The Art of E-commerce

Zen Cart! AKM-100CST Cassette 36V250W EBike Rear Driving Hub Motor 32/36 holes [AKM100CST EBike 36V250W motor] - ★★★★★ AKM-100CST Cassette 36V250W EBike Rear Driving Hub Motor Specification: 1. Voltage: 36V. 2. Brake type: V-brake, rim brake and disc brake are compatible 3. Connector: 9Pins...

www.topbikekit.com

 

[Sturmey]

Got it steeping in degreaser, will leave it for a few days.
Thanks

I would not use any water based degreaser as it may cause some rust.

 

[Tortus]

I would not use any water based degreaser as it may cause some rust.

Im going to try a bit of this as well, got nothing to loose.