I'm putting a Q128c on my rear and wanted to use my existing wheel set:
Will any reputable bike shops be able to do this for me? I've seen an article on Sheldon Brown's website: https://www.sheldonbrown.com/rinard/36-24.htm but I don't know if this will be a safe spoke setup considering the torque going through the wheel?
Any advice on this or should I replace the wheel set?
Will any reputable bike shops be able to do this for me? I've seen an article on Sheldon Brown's website: https://www.sheldonbrown.com/rinard/36-24.htm but I don't know if this will be a safe spoke setup considering the torque going through the wheel?
Any advice on this or should I replace the wheel set?