Cyclamatic power plus batt connector plate

[Acestu]

Hi, I was wondering if anyone knew where i could buy a battery connector plate, it has been smashed by someone dropping the battery in and now it can let water into the electrics

thanks
Stuart

 

[vfr400]

I don't think you can buy them on their own, but when you buy a new battery, you often get one supplied with it.

Personally, I wouldn't worry about it to much. Any water that gets in can get back out through the gap between the frame and the controller compartment's side plate as long as you don't try to seal it. What you can do is seal the cracks in the top with bath sealant until you get a new battery.

Alternatively, if you have the missing bits, you could glue it all back together with this glue:

Pardon our interruption...

 

[Acestu]

Hi VFR 400, I don't really want to bodge it up I would rather buy a new one, if they are not available to buy I will 3d print one.
Thanks
Stuart

 

[Nealh]

Hi VFR 400, I don't really want to bodge it up I would rather buy a new one, if they are not available to buy I will 3d print one.
Thanks
Stuart

Just answered your own question.
It will be easier all around to 3D your own.

 

[Acestu]

No, my question was does anyone know where I can buy one

 

[Nealh]

What ever.

 

[gsm.terra]

Here’s an older thread with the same problem that was resolved...

https://www.pedelecs.co.uk/forum/threads/broken-plastic-battery-mount-on-ebike-any-ideas-please.27707/