Hi all,
I recently posted regarding replacing the motor on my oxygen e-mate. I've done some further tests and I'm not convinced it is the gears that are at fault.
The motor will run and drive the wheel for about 5 minutes but then there is a graunching noise and the motor stops driving. No amount of throttle gives any response at all - no noise, nothing.
Any clues as to what might be wrong?
Thanks
I recently posted regarding replacing the motor on my oxygen e-mate. I've done some further tests and I'm not convinced it is the gears that are at fault.
The motor will run and drive the wheel for about 5 minutes but then there is a graunching noise and the motor stops driving. No amount of throttle gives any response at all - no noise, nothing.
Any clues as to what might be wrong?
Thanks