LCD S866 + Brainpower controller

[AGS]

No it won’t it’s a completely different controller for a brushed motor. You will need a pulse width modulated controller.

It is possible to run a brushed motor without using any controller at all, but it will run flat out. A PWM controller will give you speed control.

Here is a simple tutorial of how to control a brushed motor.

Fundamental of PWM Speed Control for Brushed DC Motor | RobotShop Community

This article highlight about the principal behind PWM speed control for Brushed DC Motor.

community.robotshop.com

 

[Hush]

I have a Brainpower and LCD866 bought as a bundle. I use a PAS, motor brushless no Hall sensor. No error message, reacts well to the PAS ... But wattage and ampers stay at 0 and the P14 parameter (Maximun Current) does not do anything . I put a wattmer in serie and can detect 150W and 6A wich is OK.
Any parameter I forgot ? Any idea ? Just send back the bundle and hope next one will be better ?
Thanks.
Joël UGHETTO

 

[Hush]

The tests were done in the workshop with a power supply. I received the battery, put it on went for a tour ... everything is fine. Speed, Watt, Amps.
There is even a kind of regulation... speed regulation maybe.
Joël UGHETTO