Hi,
I've got a SkyRC D100 V2 charger/discharger. I've set up a 4 cell and 6 cell testing trays wired in series.
So with the 4 Cell we have a maximum charge voltage of 16.8 Volts. The question I have is that each time I put cells in to charge them and then do a discharge test on them, the machine asks me how many amps I want to set if for and it is defaulted to 1.0A. I've left it at that for the charge though I think that 2 or 3 would be okay yea? And when I set it to discharge the batteries the maximum discharge amperage it will let me select is 2. I would think that since these are 3000mh cells that they should be capable of 3.0 drain or if they are 2c then even 6.0. Am I looking at this from the wrong perspective? Can I charge them at 2 or 3 amps and shouldn't I be able to discharge them at 3 or 6A?
I've got a SkyRC D100 V2 charger/discharger. I've set up a 4 cell and 6 cell testing trays wired in series.
So with the 4 Cell we have a maximum charge voltage of 16.8 Volts. The question I have is that each time I put cells in to charge them and then do a discharge test on them, the machine asks me how many amps I want to set if for and it is defaulted to 1.0A. I've left it at that for the charge though I think that 2 or 3 would be okay yea? And when I set it to discharge the batteries the maximum discharge amperage it will let me select is 2. I would think that since these are 3000mh cells that they should be capable of 3.0 drain or if they are 2c then even 6.0. Am I looking at this from the wrong perspective? Can I charge them at 2 or 3 amps and shouldn't I be able to discharge them at 3 or 6A?