PAS and Display with Julet connectors.

[bumbling]

I just received a conversion kit from cyclotricity, and as the title says i need a little help trying to find a display and PAS sensor with julet connectors, which i'm planning on buying from BMSbattery, as they are a quarter of the price than from cyclotricity, as the i've pretty much settled on the S-LCD3 and a 10 pole PAS sensor, but i can't quite see if they have the right connectors, and i gather they should work as my kit came with a KT36ZWSR-GP05 controller.

any help would be greatly appreciated, even if it'll mean breaking out the soldering iron.

 

[Deleted member 4366]

The BMSB ones won't have the right connectors. They won't be much cheaper either when you add on the shipping and possible duty charge.

You can cut the connectors off and join the wires directly.

 

[bumbling]

The BMSB ones won't have the right connectors. They won't be much cheaper either when you add on the shipping and possible duty charge.

You can cut the connectors off and join the wires directly.

even with VAT and handling fees it's still half the price than from cyclotricity and the LCD3 is much fuller featured than the LCD1 cyclotricity offers
i would buy from aliexpress but it's the same price but with much slower shipping, even though some sellers let you pick the connectors.

 

[Deleted member 4366]

https://www.pandaebikes.com/product-category/extras/screens/