Thumb throttle

[Len2000]

Yose power conversion-fitted thumb rhrottle-does'nt work--any help appreciated

 

[vfr400]

Yose power conversion-fitted thumb rhrottle-does'nt work--any help appreciated

You have to enable it in the LCD settings.

 

[Len2000]

You have to enable it in the LCD settings.

Thanks for info--I'll have a go...

 

[vfr400]

Thanks for info--I'll have a go...

What LCD do you have?

 

[Len2000]

What LCD do you have?

It's the one that comes with the Yose power kit...

 

[vfr400]

It's the one that comes with the Yose power kit...

Brilliant.

 

[Benjahmin]

The lcd that comes with the Yosepower kit is the one that you specified when you ordered the kit. Vfr is trying to find out which one you have so he can help you. You are going to have to be specific, i.e. is it lcd3, lcd5 or what?

 

[Len2000]

The lcd that comes with the Yosepower kit is the one that you specified when you ordered the kit. Vfr is trying to find out which one you have so he can help you. You are going to have to be specific, i.e. is it lcd3, lcd5 or what?

The leaflet that came with the kit is headed--KT-LCD3...

 

[Nealh]

If it is a KT enter in to the P settings and change P4 to 0, I expect at the mo throttle will work if you pedal first and activate it at the same time.
You have the earlier KT electronics as the latter ones are Lishui.

Edited.

 

[PC2017]

You have the earlier Yose electronics as the latter ones are Lishui.

either that or YOSE put the wrong instruction manual in the box!

 

[Len2000]

either that or YOSE put the wrong instruction manual in the box!

Tkanks all for your advice--I'll give it a go and post again