Latest activity
-
Bobbo1260 replied to the thread Disabled cyclist; with one bad choice behind her, needs help with a new bike.When the Fido 1st came out I tried a work colleagues. it was ok but I’m no fan of small wheelers. I bought a legal e-bike kit and 2nd... -
GHi just wondering will any ebike battery fit a carrera crossfire ebike 2023 ? Or do you have to buy one from halfords that you
-
AAntonyC replied to the thread Off grid battery charging.Taking the Elejoy for example, it seems a bit odd that there's no mention of the maximum current in their product page, other than in...
-
There are several differences I believe. Gear shift inner cables are usually either 1.1mm or 1.2mm thickness. The nipple at the end... -
JJodel replied to the thread Brake cable Vs gear cable.There are several differences I believe. Gear shift inner cables are usually either 1.1mm or 1.2mm thickness. The nipple at the end...
-
Are brake cables the same as gear cables? I ask because on my current conversation the original gear cable is thinner than the brake...
-
CCambiker71 replied to the thread Cyclotricity kit, no Pas but throttle works..Afternoon all, it's been a while, so I now have a new display and controller and an ebike that works again! Yay!! Many thanks to...
-
RRaboa replied to the thread Pendleton Somerby: Access to the headset.If it has an aheadset stem then the headset will have a compression ring, this helps keep the fork steerer in place. The compression...
-
saneagle replied to the thread Prices of the electricity we use to charge.Your post was anecdotal. Mine is scientific, since I have the evidence in front of me. Here's some more scientific evidence. I could... -
SYes, that should sort it, though you should charge at 0.2C, not 0.2 MPS. The cells are probably around 2500 mAh, so that would be 0.5...
-
Mmatthewslack replied to the thread Pendleton Somerby: Access to the headset.Is the cover clamped in place by the stem mounting, or by spacers? There must be something holding it if not threaded?
-
saneagle replied to the thread Battery woes again.Both methods will sort out the low cell. Your suggestion will be faster.
-
Mmatthewslack replied to the thread Battery woes again.Don't try to bring individual cell groups up to full voltage unless you are sure you fully understand the risks. If you leave it...
-
saneagle replied to the thread Prices of the electricity we use to charge.That's weird, my potatos have done better than ever this year, and so has all my fruit.
-
Iisla replied to the thread Battery woes again.Thankyou for the quick response so should I plug it in and leave it for 24hrs or should I place the prongs in the bms pins first? I’d...
