Latest activity
-
soundwave replied to the thread Computers and stuff....new phone day s24fe 3 more and can build brutucus vortex on route need more space lol -
-
Pportals replied to the thread Battery Fires.Yes, just like buying the wrong size valve for a gas system or wrong breakers for a distribution box, you should be culpable. Often is...
-
Vvolt x replied to the thread Crank removal.I've found their website but I'm not at all impressed. Only two measurements and not the ones I need. There is one E bike bracket but...
-
Vvolt x replied to the thread Crank removal.I'd be wasting my time contacting Volt , saying this from experience. I've googled Feimin and can so far only find sellers selling...
-
RRaboa replied to the thread Crank removal.The overall length of the spindle is 135 5mm, 86mm is the bottom bracket shell length, 29mm is the drive side exposed spindle length...
-
RRebellion.Bike replied to the thread Anyone have any info on the Brompton hub motor?.Sorry to dig up an old post, but did you find further info out about these? I believe they may have the controller inside the hub...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.The legal settings are the same. 6kmph without pedalling. Pushing the throttle while pedalling gives a graduated output though. Push...
-
saneagle replied to the thread Lishui Controller Modification - Firmware Flash Project.The KT settings are P4=1 and C4 =3. It gives you a throttle that gives 4 mph without pedalling, max speed when pedalling (15.5 mph set)... -
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.That's not how it felt. Maybe the torque simulation is more nuanced, who knows? Well maybe someone on the German forum but that would...
-
saneagle replied to the thread Lishui Controller Modification - Firmware Flash Project.I've tried controllers that give power in proportion to pedal speed, and I found them absolutely diabolical. In any gear, you start to...
-
Vvolt x replied to the thread Crank removal.There is one 84 / 147 at least one measure is good. 12 mm extra on the overall length. Is it too much Like you I don't know. The...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.As it stands these are my initial feelings on the Lishui controller compared to the KT. Positives - Graduated legal throttle rather...
-
SSparksandbangs replied to the thread Lishui Controller Modification - Firmware Flash Project.I have experimented moving P1 up and down but it makes no difference. It could be it's not mapped from the display to the controller. I...
-
SSparksandbangs replied to the thread Crank removal.Thought the Amazon link I posted earlier was pretty near. 5mm out. I could be wrong though. If someone else wants to confirm...
-
Vvolt x replied to the thread Crank removal.Do I just get a bracket and transfer the needed parts on to my axle. I'm not going to find anything near what I need. Going back to...
![20250725_231953[1].jpg](/forum/data/attachments/61/61611-d9ad689de69108a00f7f9cf70e064a0a.jpg)
![20250725_232021[1].jpg](/forum/data/attachments/61/61612-3fe05147f936681e67af4961a51778b5.jpg)
![20250725_232043[1].jpg](/forum/data/attachments/61/61613-394bfb47d4dc82738d028d3cb6e2b89d.jpg)
![20250725_232057[1].jpg](/forum/data/attachments/61/61614-7fa7bb22948d5bc6d303b56e00a85cba.jpg)
