Latest activity

  • P
    Hallo Bin neu in der Welt der E-Bikes... Ich habe seit kurzem ein Moma Bike mit einem AKM Hinterradantrieb. Kann mir jemand antworten...
  • saneagle
    saneagle replied to the thread Battery Fires.
    My opinion is that consumers are the main cause of battery fires. Ask yourself why yours and mine batteries don't catch fire, and...
  • E
    E-bobby replied to the thread Yamaha PW-ST Motor Jerky.
    I tried moving a magnet past that area and the speed still didn’t change on the display, I have ordered a new one and I am really hoping...
  • A
    AntonyC replied to the thread Battery Fires.
    Agreed when it comes to gross cases but both your examples would simply wear batteries out faster if they had adequate (ideally dynamic)...
  • Nealh
    Nealh replied to the thread ZB pin.
    Typically a speed switch is three wires, Gnd , 5v and input /signal. Trying to think logically from past experince one would say ZB is...
  • Nealh
    Nealh replied to the thread ZB pin.
    A pic may help also follow the pin out track to see what colour wire it leads to.
  • flecc
    Post relayed to Admin for attention. .
  • flecc
    Good morning everyone! We’re here on Brewers Lane, Richmond (TW9 1HH): Whilst we have focused on the most interesting options...
  • Nealh
    Good morning everyone! We’re here on Brewers Lane, Richmond (TW9 1HH): Whilst we have focused on the most interesting options...
  • H
    Harmonk reacted to saneagle's post in the thread Panasonic NKY226B02 wiring with Like Like.
    Just looking at the picture of yours and without testing anything, I would have said that yours switches on the positive and the Out (+)...
  • A
    AntonyC replied to the thread Intermittent loss of power.
    Do they cut out only when the motor's working hard such as climbing? That and both bikes being affected could be down to the batteries...
  • Benjahmin
    Benjahmin replied to the thread More Seizures.
    Can they do that , legally? Seems like a good idea though. You keep the bike, we keep the kit 'cos that's the illegal bit.
  • LEFTFIELDBIKES
    Good morning everyone! We’re here on Brewers Lane, Richmond (TW9 1HH): Whilst we have focused on the most interesting options...
    • leftfieldbikes_brewers_lane_01.jpg
  • chris_n
    chris_n replied to the thread Yamaha PW-ST Motor Jerky.
    The centre of the magnet should pass the groove in the sensor near the mounting point. Yours is way too far from the centre of the wheel.
  • V
    volt x replied to the thread Crank removal.
    I've fitted it on the bike now. I tried knocking it out. when I knocked the axle out the bearing stayed within the ringnut on the...