Latest activity

  • N
    I hadn't used my bike for the past five weeks for various reasons. When I came to turn it on the other day nothing happened - no lights...
    • oops1.jpg
    • ooops2.jpg
  • saneagle
    saneagle replied to the thread Latest Project Finished -Nearly.
    Here's what's inside the PSWP battery: The switch, charge socket and indicator LEDs are all glued in, so I had to cut all the wires...
    • 20250907_144219.jpg
    • 20250907_213147.jpg
  • flecc
    flecc reacted to StuartsProjects's post in the thread Pedelec Law - The Details with Like Like.
    And maybe the are good reasons why the regulations are not changing. There are no doubt a few e-bike riders that 'need' to go faster...
  • harrys
    harrys replied to the thread Greasing up the TSDZ2B.
    Yikes. I do have a mounted AKM128 with a dead speedsensor. I am going to clamp the motor in a vise and try turning the 26" wheel. Works...
  • S
    scription reacted to saneagle's post in the thread More Cheap PSWPower Stuff with Like Like.
    They have 201 rpm AKM 100SX cassette motors listed at $45 inc. shipping. I just bought one with a complete 15A KT controller kit for...
  • P
    Peter.Bridge reacted to saneagle's post in the thread More Cheap PSWPower Stuff with Like Like.
    They have 201 rpm AKM 100SX cassette motors listed at $45 inc. shipping. I just bought one with a complete 15A KT controller kit for...
  • M
    matthewslack replied to the thread Yamaha PW-ST Motor Jerky.
    If you have checked it's not the speed sensor/magnet, then diagnostics at a dealer is almost certainly the next step. Bite the bullet!
  • M
    matthewslack replied to the thread Pedelec Law - The Details.
    I'd go one more step and give a solution! Just implement s-pedelec class, facilitate the insurance issues around it, and ban them from...
  • M
    matthewslack reacted to StuartsProjects's post in the thread Pedelec Law - The Details with Like Like.
    And maybe the are good reasons why the regulations are not changing. There are no doubt a few e-bike riders that 'need' to go faster...
  • saneagle
    saneagle replied to the thread Greasing up the TSDZ2B.
    AKM motors usually open easily if you heat up the hub to the temperature where it's just becoming too hot to touch.
  • saneagle
    Controllers that don't work normally have blown MOSFETs and occasionally blown 5v regulators. Sometimes, when people mess about with...
  • Nealh
    Nealh reacted to saneagle's post in the thread Bafang clutch with Like Like.
    That's the same as many other guys on this forum, but we all had a go and got success - very satisfying! I've built about 20 wheels now...
  • saneagle
    saneagle replied to the thread Bafang clutch.
    That's the same as many other guys on this forum, but we all had a go and got success - very satisfying! I've built about 20 wheels now...
  • saneagle
    They have 201 rpm AKM 100SX cassette motors listed at $45 inc. shipping. I just bought one with a complete 15A KT controller kit for...
  • T
    Tortus replied to the thread Bafang clutch.
    I don't think I could build a wheel, never done one before. Cheers