Latest activity
-
Hi, following on from my previous post I have looked the existing PAS sensor and see no reason for the half turn to get a motor signal...
-
saneagle replied to the thread More Seizures.This came up om my feed: https://www.youtube.com/shorts/CU2-9mvQbcA -
flecc reacted to Brian Field's post in the thread New owner of a whisper wayfarer step through with
Like.
All sorted, it was also a genuine charger, used on the battery pictures supplied, after speaking to David, I know these days it's... -
MikelBikel replied to the thread The Anything Thread that is Never off subject..If there was something in it Clings-on, Poopy pants or Barry O' would've used it. Unless they were All on the island? Together with... -
TTony1951 replied to the thread Shengyi Motor Repair.Oh dear - This story reminds me of the number of times I have finished a mechanical reassembly and realised that I still had an unused...
-
Ddavell replied to the thread KT LCD8 - making legal with settings.Thanks Neilh, that seems to work.
-
TTony1951 replied to the thread New owner of a whisper wayfarer step through.I think it is a damned shame that Your business was rubbished here and on youtube over this matter. 1. The battery was recalled years...
-
JFwiw i spent a good while 'researching' ebikes before my plunge. Prior to landing in here almost everything i had read had given me the...
-
TTony1951 replied to the thread Display unit or controller fault?.I wonder what the new Product Regulation and Metrology Act 2025, passing through Parliament might do to the availability of readily...
-
saneagle replied to the thread Shengyi Motor Repair.That was point 10. OK, I'll take you all out of suspense. You're all going to kick yourselves just like I did. I guess you'd all have...
-
saneagle replied to the thread Display unit or controller fault?.Sometimes that come out of the controller get pulled, but there's no sign of that. I can't see any sign of disturbance that would cause...
-
cyclebuddy replied to the thread Bosch Troubleshooting!.Then you'll probably need a dealer with the CANbus diagnostics software. Probably not easy to find on a "very remote island". -
BBenlingwood replied to the thread Bosch Troubleshooting!.I wish it was as simple as that!
-
That looks ok. Nothing burned or obviously water contaminated. I'm going to bet on the lcd being duff, or its connecting cable. This...
-
TTony1951 replied to the thread Display unit or controller fault?.That looks ok. Nothing burned or obviously water contaminated. I'm going to bet on the lcd being duff, or its connecting cable. This...
