Recent content by mart.hart

If you Ask in the tec section people can rebuild.

Can you adjust the wheel size in the computer . If you put in say 700 cc on 26in wheels will it cut out later ?

Yes, Kaspersky is still not happy.

Kaspersky says it's something to do with Java ?

Hi and welcome, I have been on the Wirral coastal path and lunch at New Brighton. There is also an old railway path from Liverpool to Southport with lots of branches off it to explore. What do you want a bike for, commuting or are going to explore the mega hills in North Wales ?

Just in case anyone wonders what the mile tunnel is. The leeds-liverpool canal goes underground in the Foulridge area. Not for quite a mile but the 1640 yard tunnel doesn't have the same ring to it..

Okies. we look to be cooking on gas now. Will let you know how I get on later in the week. Mart

Update on the suspect 4 wire block. White. wire feed in (so 37v) Red wire. 5V Black . ground Green wire. HO. goes to a point on the board marked HO, so that could be Hall Is the posative on a throttle 5v so its a switch or 37v so its...

Thanks for that Dave, if it had to be all the way around I would have given up before I started. Mart How did you know about my aunty Bob, we dont talk about him

Hi Anniegirl and welcome. If you are ever cycling along the Leeds-Liverpool in the Foulridge area watch out for an old duffer walking a ginger cocker spaniel (Although the wife says its golden) and say hello. Mart

Thanks d8veh that sound logical just a change of colour on one of the wires in the 4 wire block and the white is an extra power for led's. Connectors don't matter as this one is off my wife's bike I don't have any connectors on them as I soldered and shrink wrapped for room. They are new and...

A close up

No the trottles I have seen have all been red/blue/black which dont match up with the 4 block of wires

No I just want a bog standard throttle. there are lots of ruts in this part of the word where you cant peddle.

As for soldering the shunt, I get the impression that I should solder a line along from point A Taking in the boards solder to about point B third of the way along. This is just a line of solder and not coating all the way around ?