Recent content by shaun wyatt

I will have a look and get some pics

Hi awol, no movement on the wheel at all , if i pick the back of the bike up and spin the wheel there is no noise but if i am on it and even free wheeling the noise is there

Hi nealh, I do not have rotors and the bike has been fine for the past 2 years

Thanks vfr400, yes checked that, i have turned the bike upside down and spun the wheel with no problems and spokes are tight. i'm wondering if it is coming from the motor. Apart from the rubbing sound the bike runs as it should.

Hi, I have a 48v 1000w panda ebike kit. I have started to notice a rubbing noise from the rear wheel which sounds like brake rub.I have remove the rear mud guard and checked the brakes for binding checked the frame for cracks and tightened everything up.if I lift the rear wheel up there is no...

Ok thanks very much

I have been charging the battery every 20 miles as i do not know how much is left https://www.pandaebikes.com/shop/batteries/10-4ah-48v-dolphin-type-downtube-battery-lithium-ion-samsung-cells-uk-charger/

https://www.pandaebikes.com/shop/conversion-kits/panda-1000-eco-electric-bike-kit-48v-1000w-black-motor-led-screen/ Very Basic

Hi,i have built a pandaebike setup, but after riding for about 25 miles the battery gauge still says full on the display.They are not replying to my emails and was wondering where i can buy another one with a speedo function as well.

Thanks mate, the weight is no problem as the bike is so heavy anyway:)

So if i put stan's no tubes for example inside the tube of a regular tyre that would be the same protection as tubeless

I have 700c 32 on mine rear motor and to change the back tyre is a right pain.First time out on my new build and puncture

I have been looking for something like this for bike wheels but cannot find anything anywhere

Thanks for all the replies,i will have a look into it further