Recent content by yumseyo

Thanks saneagle for the reply. Would you show me what you made or found when you are done? I found one on ebay.

Hi All ! I need your advice, I have a carbon fiber (maybe aluminum with carbon fiber covering?) hard tail that I want to install a Bafang BBS02 onto. The bottom bracket is a threaded 68mm and the BBS02 fits into it with clearance around it for wire routing. The frame looks like it has an...

Thank You ! I will now buy a Bafang throttle and re wire it..

If I got the Bafang throttle to work, would I loose the PAS or would both work simultaneously?

ohh.. thank you!!

THANKS vfr400, Sorry, but what is a PCB? I could follow directions but am not that great with electronics. I may just get a 24 volt with higher aH rating for longer run time and give the bike to my wife..hee hee Don

Thank you Kristen, From the way I described my problem, it sounds like the battery right? Ok, you have convinced me not to go 36volts. But if i had 24 v 9ah in it now and went to 24 volt 15 ah, would that extend my run time?

Thank you So much for your reply...

Yup, that's what I was thinking too. I have to run it down again and measure the voltage. What is your experience with installing a larger battery like 36 volts. I will attach a 50 second youtube video so you can see where the battery is. I was just going to get an external battery and mount...

Hi All ! I have a velomini 3 ebike that works fine for about 10 minutes, then shuts down. I let it sit for about 10 minutes, then it would power back up but the indicator lights go dim or off under a load. I have 28.4 volts after charging over night and confirmed that I have 29.3 volts from...