Ezee Torq motor cutting out

[MR E]

Has anyone had a problem with the Torq motor cutting out and the diags displaying 8 led flashes to indicate a hall sensor problem.

Mine has cut out several times this week but on switching off and then on again all is ok, and I am able to continue my journey.

When the problem occurs, the battery indication meter displays as normal,
but thought I heard a noise coming from the motor before it temporary died.

This problem started about a week ago after cycling for many days in rain.
Guess it could also be a controller fault.

The bike has dried out since the rain but problem still occurs.

 

[flecc]

Connections of the five Hall sensor wires between the motor and controller are the usual cause. Check any connector inline and remake the connection by unplugging and replugging to ensure the connections are reliable.
.

 

[MR E]

Thanks Tony

I will try this and update when solution found.It may take a while as the problem is intermittent.