Help,
I finally got a 12 magnet PAS to replace my old cracked 5 magnet one.
Wired the bike back up turned it on display looked normal.
But the only things that work are throttle, walk assist, power assist up/down and brake cutoffs
No speed odo is fixed at 360km when i look in parameters up and down button simu.... speed limit is 100 P15 is 009567.
Most parameters looks changed.
What to do? plz help.
Controller is generic chinese 36V (see pic) 3 + 6 pin conn to motor.
Motor iss (MXUs XF08 36v 250w rear hub)
LCD ??? see pics probably some old kingmeter
As i wasnt clever enough to write down the old settings i need help/advise on what to do.
I have a new lcd as well a king meter nokee but dont think the org is broken.
And dont know if the kingmeter is compatable with my controller, motor and so on.
I checked the wires with my fluke too
Thx
I finally got a 12 magnet PAS to replace my old cracked 5 magnet one.
Wired the bike back up turned it on display looked normal.
But the only things that work are throttle, walk assist, power assist up/down and brake cutoffs
No speed odo is fixed at 360km when i look in parameters up and down button simu.... speed limit is 100 P15 is 009567.
Most parameters looks changed.
What to do? plz help.
Controller is generic chinese 36V (see pic) 3 + 6 pin conn to motor.
Motor iss (MXUs XF08 36v 250w rear hub)
LCD ??? see pics probably some old kingmeter
As i wasnt clever enough to write down the old settings i need help/advise on what to do.
I have a new lcd as well a king meter nokee but dont think the org is broken.
And dont know if the kingmeter is compatable with my controller, motor and so on.
I checked the wires with my fluke too
Thx
Attachments
-
1.1 MB Views: 12