Help - Panda Pro 1000w Rear wheel - Speedo not accurate.
so i took it for some test runs today and the max the speedo will read is 12 mph. even when you know your doing 20. ive been through all the settings even factory reset it, with no joy.
is it the wheel that tells the display how fast your going.
any ideas on where to look for the fault. ive checked all settings wheel size ive tried 26 and 700c as theres no 27.5. theirs 8 advanced settings Ive tried different ones in 5 off them. i do understand what each are for and the only 2 that i though may effect is the magnet number and the pas sensitivity. but if the speed reading comes from the wheel then they shouldn't matter.
thanks all
so i took it for some test runs today and the max the speedo will read is 12 mph. even when you know your doing 20. ive been through all the settings even factory reset it, with no joy.
is it the wheel that tells the display how fast your going.
any ideas on where to look for the fault. ive checked all settings wheel size ive tried 26 and 700c as theres no 27.5. theirs 8 advanced settings Ive tried different ones in 5 off them. i do understand what each are for and the only 2 that i though may effect is the magnet number and the pas sensitivity. but if the speed reading comes from the wheel then they shouldn't matter.
thanks all