It was, I had a puncture. I stripped it, re-shod the back wheel and reassembled it, didn't touch the power or PAS system, battery was off bike. The most I did was decouple the chain, and release the hub gear shift cable and roller brake cable.
Now, the power switch does nothing. No LEDs, no power at all. I've had a DMM across the battery, showing a none-too-shabby 26.2 volts.
I've stripped the panelling off around the motor..all looks dry, all wires look OK. Opened the switch/indicator unit - all clean and shipshape there too. Still dead as a doornail.
Anyone have any ideas? the pack output suggests that itself is fine..the pins it locates on are fine, the wires to those are firm and seemingly fine..am I missing a fuse or thermal trip somewhere that may have gone squiffy? All I can find is a flowchart for an Axion City..and it's a bit heavy going..heh.
The gears work, the brakes work, the bike itself works...but the power assist..she be broken...
Now, the power switch does nothing. No LEDs, no power at all. I've had a DMM across the battery, showing a none-too-shabby 26.2 volts.
I've stripped the panelling off around the motor..all looks dry, all wires look OK. Opened the switch/indicator unit - all clean and shipshape there too. Still dead as a doornail.
Anyone have any ideas? the pack output suggests that itself is fine..the pins it locates on are fine, the wires to those are firm and seemingly fine..am I missing a fuse or thermal trip somewhere that may have gone squiffy? All I can find is a flowchart for an Axion City..and it's a bit heavy going..heh.
The gears work, the brakes work, the bike itself works...but the power assist..she be broken...