The Department for Transport has today confirmed to Pedelecs that an ordinary cycle, already ridden on public roads as such and subsequently converted to a ‘twist and go’ electric bike, will not require type approval.
The DfT further clarified that type approval ‘only applies to new vehicles, not converted ones’.
The latest guidance on conversions follows on from news that electric bikes manufactured as a ‘twist and go’ from January 2016 will require type approval.
Their response reiterates that ‘twist and go’ type approval requirements are directed at the manufacturers, meaning that ‘riders making conversions are not committing an offence’ (with regard to type approval requirements).
It is also our understanding that, since not all cyclists are technically proficient in fitting conversion kits to a bike, that conversion can also be carried out by a business, so long as the bike in question has been ridden on public roads before conversion (i.e. the bike is not considered ‘new’).
The full response from the DfT reads:
“In response to your email about converting a normal pedal cycle which has first been used on the public road as a pedal cycle, I am pleased to report that type approval does not apply – it only applies to new vehicles, not converted ones. Therefore if you convert a pedal cycle which has already been ridden on the road to “twist and go” operation, it does not become subject to type approval. As previously noted, the regulations will be directed at the manufacturers and so riders making conversions are not committing an offence. Manufacturers are permitted to sell kits of this nature but would need to ensure they are in line with regulations if sold as EAPC kits (EAPC power and speed limits).”
Currently, new electric bikes fulfilling the definition of an EAPC (electrically assisted pedal cycle, limited to 15.5mph motor assistance/250w) are exempt from requiring the manufacturer to type approve before retailing. However, ‘twist and gos’, electric bikes manufactured with a throttle that can independently propel the bike forward without the rider needing to pedal, fell through the legislative cracks of type approval exemptions since motor assistance isn’t cut off when the rider ceases pedaling:
Article 2(h) of the EU Regulation No 168/2013 excludes from its scope the type approval of “pedal cycles with pedal assistance which are equipped with an auxiliary electric motor having a maximum continuous rated power of less than or equal to 250 W, where the output of the motor is cut off when the cyclist stops pedalling and is otherwise progressively reduced and finally cut off before the vehicle speed reaches 25 km/h.”
Twist and gos are particularly popular with those who may have limited physical abilities but want to stay active and mobile.