Recent content by Adrianlle

Adrianlle submitted a new listing: Bafang BBS01 conversion kit (bought from Woosh). - Bafang BBS01 conversion kit (bought from Woosh). Learn more about this listing...

Thanks. They are getting some soon so Ive ordered a 20Ah. Looking forward to replacing the 36v Bafang Bbso1 with the 48v and a Tsdzv8 and trying it the v steep hills around here.

Haven’t been in here for a while so good to be back. I have an old Wisper 906XC. I converted it from front hub to a mid drive Bafang Bbso1 with kit from Woosh. It’s been v good but for health reasons now need some more grunt for climbing steep hills on Exmoor. So planning to swap the 36v Bafang...

Fantastic. Thank you.

Thanks for all this help. Fantastic. The bike has a14 speed Rohloff rear hub and an eccentric bb which precludes the use of wither a mid drive or a rear motor. So looking for a front hub motor that gives as much grunt as poss on steep hills. My existing Sparticle/ Yosepower kit on my Rohloff...

Thanks for this. I googled Topbikekitand got a U. S. site e and one on AliExpress. I assume the latter one is the correct site? If I go for the AKM which is the better legal 26ins front hub and which KT controller and LCD would you suggest, if you don’t mind me picking your brain. Also do I...

Thanks. Have emailed them now I know where they are. I’ll wait until they have stock but of interest is theirs a Bafang hub or not?

Thanks. Realise I posted in the wrong forum section by mistake. Anyway, that’s what I thought too and your reply is v helpful I’m quite happy to buy from the Chinese though don’t want to be landed with import duties. However if it is a Yosepower I can’t seem to find a site to buy it from -...

Help with another conversion please? I recently bought a lovely used Rohloff touring bike which has also been converted to a front hub motor. It is a lovely combination and I would like to replicate the kit on my wife’s tourer. The kit was fitted by Electric Bike Sales Cambridge and from their...

Thanks for this. Now spliced into battery cables and all well.

Afternoon. Recently bought another(!) e bike. This time a Thorn Rohloff tourer with a Yosepower 250w front hub kit. Down tube bottle battery and spare on custom cradle on rack. V nice outfit. But has no lights. Light setting on Y01 display but no cable from controller. I have a spare Busch...

I’ll try this too once I’ve regressed etc. On the other hand there is always a second hand Rohloff to think about!!!!

Thanks for this. I’ve already tried my LBS and they say it’s ahidtinh ok without the motor but it is usual for them not to shift under any sort of load. Their view is that it doesn’t work with load from mid motor. But I know there are people on this forum like you who have been v happy with...

I recently converted my Wisper 906 XC from a Dapu front hub to a bbs01 ( wanting to stay legal) . It has an Alfine 8 hub. Much nicer. 2 related problems however.1. The Alfine doesn’t want to change down to the low gears. So on a hill when I change down it stays in a higher gear. Easing of on the...

Yes, try a bigger sprocket on the rear wheel. They are about £10 and lots of “how to” clips on YouTube. I live in Exmoor with lots of 20% hills! I changed the front hub to a mid motor bbs01. A 46t chain ring and 20t sprocket an an Alfine 8 just about gets me up them.!