Recent content by dhav

stange as the number of flashes was 10 and it says speed control i am guessing thats the throtlle which is a new one i just bought

thanks all for the info the throttle not working get a flashing battery light on the dispaly even tho new throttle

Hi thank for the link but I don't need the throttle I need the wiring diagram of which cables to connect it to on the controller as I disconnected all the cables by mistake

Hi the wires don't match on my bike And yes it's a D1

Hi has any one got a wiring diagram for this bike or can same one show were and which connects are for the throttle both on the throttle and the controller

So I checked the front shock and found that the left side shock is 8.76mm and the right shock is 8.06mm is this enough for the wheel to lean to the left

Here you go both said

is there a way to adjusting them

I fort it was the fork cos one side is lower then the other by 1cm but guy at halfords Said that 1cm would make no difference

Hi its goee in place no problem but when it goes down the wheel is rubbing as above photo There only a gap to make the wheel sit straight

OK will have a go again not had a bike for over 15 years I fort you just put the wheel in the drop out till it stops then tight up I have tired it one side is sitting in the drop out till it stops and one side is sitting little up from the end of the drop out

OK will have a go again not had a bike for over 10 years I fort you just put the wheel in the drop out till it stops then tight up

the drop out are part of the frame not sure what you mean by user error i did remove the wheel but i did not do any thing to the wheel if i move the right side up from it drop out it will become straight

hi yes oem its a fido m1

Hi i have a fat wheel bike and for same reason the wheel won't go on straight I am not sure why it rubs on the left side I don't think the wheel is buckled the quick realise is fine Any ideas