Recent content by Garry Hallam

Looks like I will need a new display. Do you know what type they are?

The display controller is playing up on my bike. I will check connections but It will not power off sometimes without switching off at the battery. Anybody else experienced this?

I wondered that too. Would fat bikes use band brakes do you think?

Cool, I was hoping you would notice. Thanks

I will just have to test it on the controller when it arrives. I cannot find any info on the motor anywhere. I opened it up but despite there being a model number on the control board it still fails to bring anything up. It seems was made in 2016 and obsolete

https://www.amazon.co.uk/gp/aw/d/B0DXTDQH2Z?ref=ppx_pt2_mob_b_prod_image Could somebody advise what cables I will need with this controller for bafang 9 pin motor.

I try this approch as it is steel frame, Cheers.

Or....tweak the frame to suit. Probably an easier option!

Sorry, I realise they are hardened and I was intending to grind the flats to 136mm . It would require a spacer on the outside once in the frame to allow the nut to engage. If that makes sense! Either that, or a new longer nut from hex bar counter bored to miss the shoulder protruding. Similar...

I could not check the speed as my only other controller is on the est100 and has a weird 9 pin pinout. I have ordered a 15amp KT controller to pair the motor with. As you can see with these dividers set to 136mm dropout width it would be just about doable with a max 3 speed freewheel. This...

My friend works at a Powder Coating company in Ashton Under Lyne. The cost per bike frame is £50.

Should be no problem as long as you can fit it somewhere.

I always said I was mad. Currently I have three of them. A 250w BBso1 36v 31ah fitted to a 26" Voodoo Bantu. There if I want a 60 mile ride, only did it once. My Backside took days to get over it. Decathlon est100 250w rear hub motor 13ah. Love it, but very heavy to move about at home. Argos...

I wondered if I should strip it down and modify it on my lathe to fit 135mm dropout

Thanks for the info. I will do as you say and check the speed. It was advertised for 20" folder. What speed would a 20" folder have?