Recent content by Malcolm B

  1. Malcolm B

    EBCO UCL 10 for sale

    My as new ucl 10 is for sale due to my disability where I cannot pedal for more than a minute or 2. I am looking to sell this one and repurchase a 500 watt bike with a throttle control etc. The ucl10 is genuinely in an as new condition , I have replaced the dutch handlebars with straights but...
  2. Malcolm B

    PAS sensor onto a wheel ?

    Thanks for the input guys. I have looked at the tranz controller and there is no facility for a throttle. Every input is in use with nothing spare. I will try to use an easy fit PAS kit on the rear wheel and connect it to the pas wiring that already exists. I will use the cut out brake to shut...
  3. Malcolm B

    Tranz battery with controller.

    Thanx for that d8veh its a job for Monday I will take the controller off and have a good look round. The battery looks as though it has 4 connections but I will see when I take the controller off , see photograph.
  4. Malcolm B

    Tranz battery with controller.

    My UCL10 uses a tranz 36v pannier battery with what seems to be their own controller. Has anyone got a wiring schematic or colour coding for this. Its all fitted on an ebco ucl10 250watt. In fact being a novice to electric bikes , is there a standard wiring colour code for all the bits and bobs.
  5. Malcolm B

    PAS sensor onto a wheel ?

    My idea was that I wouldn't have to keep pedalling to keep the motor running. Once the bike is moving the PAS sensor would activate from the front/rear wheel and I then wouldn't need to pedal at all. My problem is that my lungs are really bad and the slightest exertion and I am gasping for...
  6. Malcolm B

    Kalkhoff Pro Connect S10 (2012)

    what is the motor power , is it a 250 or 500 watt , is there a hand throttle as well as the pedelec.
  7. Malcolm B

    PAS sensor onto a wheel ?

    I use an ebco UCL10 . Super bike until I can hardly pedal any more as I am now disabled. There is no throttle fitted as standard so I am looking for a way to engage the motor without pedalling or at least with very little effort. Can I move the pas sensor and ring onto the front or rear wheel so...