Neil5403

Do the handlebars raise on this model as it looks like it needs raising with the saddle set high?

Would you say it is equivalent to large or XL frame? Suit what height? Any warranty remaining? What is your best price? Drop e a PM if you like. Thanks, Neil.

That sounds like a complicated job. How would I know which one I needed?

Did it ever sell?

Hi alll. I haven’t been on here for some time. The wife has a Careera Croossfire that she bought new from Halfords about 3to 4 years ago. It has always randomly cut out and was a known issue but no-one seemed to know why back then. As her bike still does it has anyone ever found the reason why these bikes cut out for no apparent reason. It can do it anytime but lots of times is when it is rolling downhill at speed. Is this fixable or do I finally give up?

Good tip, thanks.

It came standard with a 140 to 160 adapter and a 160 disc. I have put the 160mm disc back on and the motor hub was fouling so I have packed the calliper adapter plate up with 2 pairs of washers , top and bottom and that seems to work. Need to get some black coloured washers and bolts to blend in better. Hopefully that has done the trick.

This thread is a few months old but I seem to have the same issue. I have just converted my 2020 Specialized Crosstrail and my last issue is the rear brake disc. As the calliper was rubbing on the rear hub motor, I have fitted a 180mm disc. The problem is I cannot find an adapter plate to fit my mounting bolts which are just under 40mm apart and not the standard 68mm. Is it a load of washers or file down the calliper to avoid the disc. Neither option I like the sound of? I know my wheel need turning around for the cable exit to point downwards. Not a finished job yet!

They do the 5 gold pin for £345. I assume they are better than the 4 spade type connection?

Thanks but it is £655 with charger!! No Thanks. That is over double the price of the one from Cardiff listed above.

Looking for a 48v approx 17ah Hailong battery. My last battery purchase was 3 years ago from China, but would prefer a UK one if possible. Anyone recommend a good seller in the UK that doesn’t cost the earth ? Found this seller on eBay from Cardiff. Samsung cells…

Well vfr400 waved his magic hands over my BMS , and made everything well again. Big thanks to him....

Thanks for that. Sent PM to vfr for some sleep work... I would have got my BIL to do the basic soldering.

That is great info thanks but it is beyond me as I am not a good solderer! I will try to find an ebike battery person locally as I do not want to post it. Failing that I will give it to my brother in law who tinkers with remote aeroplane batteries and give him the instructions above.. It would have been so much simpler if PSWPower would have sent me the BMS I ordered!

Current BMS