Search results

Mid drive will not fit the bottom bracket has 2 lumps on the bottom that are used to tension the belt that get in the way Had one sat in the garage for a couple of months trying to find a way around the problem had to admit defeat and sold it :mad: On paper it should be the perfect conversion :(

Thanks the g56 case looks good even better with the21700 cell

Try practical cycles uk based Lancashire zaynan@googlemail.com good stock and helpful As for chain line the spread a 10 speed cassette really does cause a bad chain line

Thats the problem got the last two he had in the uk asked if he could get more he laughed Do a google search for x go battery 48v 10ah but read the small print the newer one are in a larger case and 13 ah and will NOT fit

Any power is to much for the 11 the alfine 8 was ok at lower power 250-500watt so about 15 /18 amps but only after fitting a gear change sensor To get the rear cog size right took time put it in top gear with the power off human power only and spun legs round fast on pedals seem to...

You mention a igh my attempts used a nexus and then both alfines 8 and 11 speed one tooth on the rear made a change to the overall gearing always used 36t on the front wish i could afford another try

Not used 102 but did try eggrider about the same size my old eyes could not read it on the go Use the 500 c at the moment can read it and it shows power etc favourite is the 750c which sits safely in the middle of the bars best clearest display was the older dpc 18 but hate the newer...

The off the shelf settings can be set very low put the laptop on it to check what the base line is set at The special sauce is still my starting point too Imagine the shock to my system going back to a bbs01 250watt 48v and finding the firmware locked to 12amps[ half of what i am used to 24 amps]

The 5 levels on other bafang displays are the odd numbers so 5 is 9 have you access to a laptop to use the interface cable and software to custom the levels to your own requirements or the speed app available from android store

Battery from china might well come by boat can take months ,check if vat and customs is paid in the price or extra and needs to be paid by you Some of the newer displays can be used on different protocols that are for the new bafang motors my latest 850c has just one page just for basic...

First option bbs01 48v from ebay uk stock But was cheaper form https://www.risunmotor.co.uk/ options from £362 be sure to check the uk option checked price today still same and in stock v-good price :D pay and then sent from uk warehouse Battery from...

Thats why they only want to sell you a overpriced mass produced ebike that they are not allowed to repair but have to send it back or replace the whole motor:rolleyes: Looking at your picture will the pedal arm clear the chainstay ?

The bbs01 is the better option in that it requires less effort to gain assist you can ghost pedal the tsdz2 requires some [more] pedal effort The etm provides [needs] 25 amps the same as a bbs02 36 500watt except the etm has the legal 250watt markings have owned both versions But a standard...

What fun to stop 350+ kg with cable discs :eek: with the cable not even in correctly Twin motors and extended length - width bet this project did not pass Goo_O one for health and safety:rolleyes:

The bafang will fit but you need an adaptor to reduce the bb size [dia] i machine mine as required but it is not a fun job, used to be able to but ready made but have not seen recently look for press fit bearing adaptor bafang options come up but none cheap

Large lump so ride in seated position no jumps , the shaft that snapped was fitted in a charge cooker 100mm bb size special order from china lasted 150 miles , After trying 36 v tsdz2 and 48v versions in standard 68mm hard tail- fat bike 100mm and 120mm - and a fs bike. Loved the first few...

The second bearing is a good idea mine snapped at the circlip :rolleyes: also the 8mm thread pedal arm bolt hole was extra deep into the shaft

A carbon frame would not be my choice due to mounting of battery problems drilling the frame :eek: also a wider rear hub in delicate drop outs, the axle dia is larger than a quick release and often requires use of a file. All this without even thinking about stressing the carbon in a non...

He just acted stupid and bike is away for inspection was told to wait and see if a letter came in the post ,as not sure what offence to charge. [ several months ago] But now he moans about pas and 15.5 mph Carrera He purchased a bbs02 as had been told it was legal but after some homework...

At 48v 250watt a 17.5 ah battery or a 19.2/20ah will get you 23 miles even on full power 9 with ease and no range anxiety :rolleyes: On a lower power level 5 and some human effort my 48 v 13 ah battery gets me 30-40 miles off road