Search results

Next batch of bikes just come in for me to clean, setup and sell. I'll post pictures as soon as they're built up, but for the meantime: 2 3e Electric Citylight step through bikes 1 3e Electric Urban all 3 have 18ah 36v batteries which will be tested and new chargers purchased. and 1 Viking...

Couldn't help myself. It was a bargain and I've always wanted one.

Finally I've realised that a bell doesn't cut it on the mean streets of Bradford, people still step out in front of me, and Friday was the last straw with a bus overtaking me then pulling to the side very sharply forcing me up onto the pavement and almost into a bush. So as I'm still waiting...

Well I finally decided to sell the Compy I've been rebuilding. I've got a nice bike that I use daily and so don't need another nice bike and before the vultures on ebay get a chance I thought it's better to offer it on here. It's a great bike that came to me after being in storage for 2 years...

Had to clear out the garage at the weekend so my drive was an e-bike parking lot! Daughters horrid lead acid thing at the front, then the almost newTonaro Compy (think I'm selling it), my wife's Ezee Sprint behind it and finally my Cyclotricity converted Carrera. Not shown is my E-scooter thats...

My local bike shop have no knowledge of ebikes and as I'm their only ebiker customer they pointed one of their repairs to me. It was an old PowaByke in bright red (the owner believed it may have been ex post office at some time) the batteries (SLA) were depleted, they'd charge up but under load...

Repairing a named make battery with a faulty BMS, battery cells all good, full pack nearly 40v off charge but under load 11v! still 40v into the bms, so i ordered a BMS from Andy at Woosh, and it looked like a dead easy swap out, until I got to the balance wires. The plug was wired the wrong way...

Anyone know anything about this? http://www.b-t-n.cn/productshowimg/1692295638-214733447/BTN_electric_bike_meter.html Or what controller it'd work with? Had no response to emailing them.

I'm having to have a bit of a clear out (wife's orders) so my first conversion bike is up for grabs. It's a white & green Reflex MTB bike with a 36v 500w direct drive front hub, a 500w controller, thumb throttle only (no PAS although there's a connector for it) 18 Gears (twistgrip but sram)...

http://www.gizmag.com/shareroller-electrify-bicycle-share/30918/ Looks like someone is re visiting Sir Clive's old idea again. I may have a go at a friction drive this year again.

Stumbled across this site today and saw a very interesting kit, anyone got any knowledge of them?? http://www.ciclotekstore.eu/b2c/productos/1/2/12/mk-motor-hidden-controller-/1

I'm wanting a bms for a 36v 10s build (li-ion) and looked in all the usual places but wondered if there's a UK supplier anywhere? Eclipse bikes seem to do only lifepo4 ones and BMSbatterty's shipping is almost double the price of the BMS. Any ideas anyone?

As it's chuffing freezing, would there be any benefit to putting my battery inside one of these to retain a little heat...

I'm trying to be as neat as possible with my new build but I need the opposite connector for my halls cable, the one in the picture is the one from the controller. Anyone got a supplier?

So, bought a couple of batteries off Ebay, faulty, marked as do not charge. They're 36v 9Ah ones designed for Momentum bikes. Out of the box they read about 4V, so out with the screw driver and in bits to investigate. BMS looks undamaged and measuring via the balance leads each cell is about...

My local bike recycling charity have asked for some advice regarding converting a cargo recumbent bike to electric to enable them to carry bikes to the local college campus where normal vehicles aren't permitted. The bike is this one http://www.bikeweb.org.uk/artbitz/adam_hart_davis1.jpg...

Hi all, I'm Paul from Bradford, currently I run an old Ezee Sprint I rescued from my local bike shop's loft and am currently trying to convert a new MTB for my daily commute. Ex electronics engineer so not averse to getting the soldering iron out. On the lookout for a 26" front hub motor wheel...