Search results

Hi SRS, Glad your enjoying the bike! I would love to make an article on our blog an include these photos? Regards Martin

Col, The Classic motor is egg shaped. The bolts sit within the top of the Haibike frame. Whereas on yours the motor sits underneath. But is raised into the underside of the frame. The BB axle stays in the same place but the Bosch motor gives loads more clearance inverted up into the frame...

Hi, Suntour post 27.2 and a shim, both in stock here should you wish to give me a shout. Regards Martin

No worries, good luck in your search, when your ready for a crank drive eBike.. Give me a shout ;) Regards Martin

Nope, on the Gen1 it is perfect. Gives good central mounting of the BB axle and gives approx 3inches more clearancecompared to other non inverted Classic line motors. Also brings the motor out of the firing line from all the crud that flies up off the front wheel. If you want more info search...

Hi, Why not a Haibike RC29? Keeps the mountain bike look you are after. Good commuter with the lockout and 29" wheels. Also has mounts for mudguards / rack etc for commuting. Best of all you could have some fun on it at the weekends on the rough stuff as it sounds like your missing it :)...

Hi Col, The Gen1 Haibike has the motor mounted above the down tube, this gives maximum clearance and keeps the motor protected. But that is off topic as the thread is about the Performance Motor mounted on the Gen2 Haibikes. The simple answer is No. The haibike has a hinge built into the...

No worries. May be worth logging your order, just so your in the queue to receive when they do arrive. http://www.e-bikeshop.co.uk/eBike-Spare-Parts Regards Martin

Expecting a big load shortly, however the Germans have not given me an expected so looking like at least a couple weeks. I do have spare spider lock rings in though, should you end up using the screwdriver in the meantime. Regards Martin

Hi Rob, I dont think you will be able to squeeze a 48t in there. Can always try though. A 46t may be the next best with a little clearance. Plus hardly anyone makes a 48t in a 4bolt with the correct BCD. A 46t will make a difference. Dont forget that we would probably need to lengthen the...

Hi Artstu, Given that I have all sprocket sizes in stock to achieve this. I play with this sort of thing on a daily basis. Regards Martin

It is 100% not that tool on CRC. The Bosch spider tool, is only available from BOSCH. Regards Martin

Hi, The tool is only £29.99 on my website here - http://www.e-bikeshop.co.uk/bosch-spider-tool It's the sort of tool that is only used once but makes your life 100times easier when you have it. The amount of plastic lock rings I sell because people have 'mashed' up their current one and...

Hi, Any of my Bosch powered eBikes delivered with our dongle can do this. Visit the website in my signature or feel free to call to discuss the options and what's going to suit you best. Regards Martin

Haha KD you do make me chuckle. Considering some eBike dealers have only just figured out how to get their website online I think its hard to imagine anyone in the trade launching a multi national cyber attack on your servers! Your website information is likely stored on servers containing...

The USB socket is mainly there for me to plug diagnostics kit into in the event of a problem. But you can also use it to charge gadgets using the power of your Bosch eBike battery. You can use this cable to convert to female usb so then you can plug most gadgets into it and recharge on the...

Hi Rob, The chainring I fitted to your RC29 is a 44t. A 48t runs too close to the swingarm and the chain would have to be extended somewhat. 44t is the sweet spot on the RC29 in particular.42t works better on some of the other models. Regards Martin

Hi Guys, Let me shed some light on this as I was the technician in the article.. It was SRS's bike and on inspection the inside of the plastic casing had built up a lot of grime over time on lots and lots of rides. SRS does a lot of cycling in muckier conditions and it was obvious when taking a...

Hi Rob, Haven't been on here so much as been busy with sales and setting up the new store. What a lovely read on a Sunday afternoon! Thanks for your review on our website. Could we use some of your wording to combine a more lengthy review on my blog? Really nice to see a write up with some...

Hi Eddie, I have not been on here much as have been busy busy with sales and setting up our new outlet. Nice to see I am still recommended :) Thanks Eddie. Chris please feel free to give me a call or email to discuss the eBikes. Lots in stock here that would be suitable along with a good back...