Search results

Yes, your set up is way stronger than mine. I'm going to follow your one and drill a hole on my torque arm. I'm going to get this drill bit set for that: 13pc HSS Cobalt Drill Bit Set in Case. for Metal, Wood, Plastic, drill bits BN | eBay And yes I want to wheelie, but only when I want to, not...

Yes I did!! Torque arm + 1 anti-rotation washer on the chain side: Double anti-rotation washer on the other side: It should be quite heavy duty now :) I purchased this 180mm disc from BMSBattery: One Bicycle Disc Brake - BMSBATTERY What shall I do? Do I have to buy specifically a 140mm...

My temporary setup until I have the freewheel, battery holder, wattmeter, light: My Zippy compact 72V12AH is in my backpack. I'm impressed by these lipo because they have very low sag compared to my Sony V3 cells. It allows me to go over 30mph really quickly. Acceleration is good, almost as...

D8veh, I ordered a 180mm disc brake from BMSBattery, I suppose I can't install it? I need to find a 140mm disc brake?

Is all of these ok to add a disc brake to the dahon? One Bicycle Disc Brake - BMSBATTERY +20mm Disc Rotor Adaptor IS to IS 180mm 7In Hope Magura | eBay Avid Juicy 3 set of Front and Rear Hydraulic MTB Brakes | eBay Avid Juicy 3 Three SL Hydraulic Disc Brakes | eBay merci

Shemozzle I've seen these batteries and they are not bad, but capacity is way too low for me. I can't spend hundred of pounds to get 2 of them and it wouldn't even look nice with 2 on my bike. Dave, nice spot for your link I'm going to maybe buy one like others. John, I need to buy few...

Because battery container have high volumetric size, and shipping cost would be few times higher than the cost of the box. It's the same as importing rim from china. It takes a lot of space so shipping is very expensive on these items

It would be to ship to london. Postcode SE15 4LN. Do you have any empty battery box with mounting plate?: Thanks for all

Thansk Dave, I'm going to buy a 7 speed then. I'm also received this from BMSBattery: One Bicycle Disc Brake - BMSBATTERY And I'm going to order now: +20mm Disc Rotor Adaptor IS to IS 180mm 7In Hope Magura | eBay And trying to win one of these bids: Avid Juicy 3 set of Front and Rear...

What I'm looking for is a controller independent display, similar to the CA. I'm trying to get in touch with the seller but he is not answering...

If you check on the right of the screen, there is a writing "motor - W", so maybe there is a watt display. CA is nice, but I really hate the design, it's so big and bulky. Even though it's a good tool.

I'm planning to run it at 74V... but i just didn't want to mess around with hall sensors... But ok I'm going to plug the hall sensor.

Hey John, I'm happy to buy from you but you are 50% more expensive than paul even with shipping cost included. I'm also looking for several items: - Empty battery box with mounting plate. As big box as possible I have a massive amount of battery to put inside: - Ebike counter and display...

by the way, I also have sensorless controller, can the BPM work sensorless?

Is this one working? 7sp DNP 11T Freewheel

what about this freewheel, is it cassette too? So I need a new freewheel?

Dave, is your GNG a NuVinci N360? You have one and it's working well?

Hello there, I just received BMSbattery parcel and now I'm ready to convert my Dahon jetstream with a BPM: I'd like to reuse the rear wheel freewheel from my Dahon: But for some reason the freewheel removal tool doesn't go inside???? Any idea how to remove it and fit it to the...

I re-read again and they are a few to complain about efficiency loss. One of them gave precise loss: "With a derailleur system I could reach speeds of 30km/hr on a 5% grade and 40km/hr on flat ground. With the N360 it is now 24khm/hr on a 5% grade and 35km/hr on flat ground. On my commute to...

maybe... but they are definitely not motivated to do anything